Intended use b. Use safety equipment. Always wear eye protection. English Safety equipment such as dust mask, non-skid safety shoes, Your Black & Decker Alligator Lopper has been designed hard hat, or hearing protection used for appropriate for trimming the branches of trees, cutting fallen branches conditions will reduce personal injuries.
Page 7
5. Service Begin and continue cutting only with the chain moving at a. Have your power tool serviced by a qualified repair full speed. person using only identical replacement parts. This Watch for shifting branches or other forces that could close will ensure that the safety of the power tool is maintained.
Page 8
Electrical safety Chain tension adjustment (fig. A) Warning! Before chain or other adjustments, make sure that This tool is double insulated; therefore no earth wire the tool is switched off and unplugged. is required. Always check that the power supply Warning! Guide bar and chain may be hot after use.
Insert the chain bar (8) into the space between the chain Do not force the tool - allow it to do the work. It will do a tensioner and the first bolt, angle the chain bar down over better and safer job at the speed for which it is designed. the bolts.
Storage Technical data GK1000 GK1050 When the tool will not be used for several months, wipe any metal components with oil. Voltage Store the tool in a secure and dry location. The storage Power input temperature must always remain in the range of + 5 °C to Chain speed (No-load) + 40 °C.
Page 11
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.