Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker shear/trimmer has been designed for protected supply. Use of an RCD reduces the risk of trimming grass, hedges, shrubs and brambles. This tool is electric shock.
Page 6
e. Maintain power tools. Check for misalignment or Carry the hedge trimmer by the handle with the cutter binding of moving parts, breakage of parts and any blade stopped. When transporting or storing the other condition that may affect the power tools hedge trimmer always fit the cutting device cover.
Vibration Additional safety instructions for batteries and chargers The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 786 Batteries and may be used for comparing one tool with another. Never attempt to open for any reason.
Features Warning! Do not charge the battery at ambient temperatures below 4 °C or above 40 °C. Recommended charging 1. On/off switch temperature: approx. 24 °C. 2. Lock-off button Insert the charger plug (6) into the charger connector (7) 3. Blade release button at the rear of the tool.
Protecting the environment In order to obtain flat sides, cut upwards with the growth. Younger stems move outwards when the blade cuts downwards, causing shallow patches in the hedge. Separate collection. This product must not be Take care to avoid any foreign objects. Especially avoid disposed of with normal household waste.
Guarantee Technical data GL602 GS721 GL605 Black & Decker is confident of the quality of its products and Voltage offers an outstanding guarantee. This guarantee statement is Blade strokes (no load) in addition to and in no way prejudices your statutory rights. Blade length cm 10 The guarantee is valid within the territories of the Member...
Page 15
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Page 16
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...