Cisco SCE8000 Removal And Replacement Procedures page 28

Hide thumbs Also See for SCE8000:

Installation and Upgrade Procedures for Dual Cisco SCE 8000-SCM Modules

Downgrading Dual Cisco SCE 8000-SCM Modules

Downgrading the system to a version earlier than 3.6.0 is not permitted on a system with dual Cisco SCE

8000-SCM modules.

Perform the following steps to downgrade:

Step 1

At the SCE# prompt, enter reload shutdown and press Enter and then turn off the

Cisco SCE 8000 10 GBE platform.

Step 2

Remove the Cisco SCE 8000-SCM module in slot 2.

Step 3

Turn on the Cisco SCE 8000 power.

Step 4

Perform the downgrade.

Upgrading Dual Cisco SCE 8000-SCM Modules

Use the Upgrade wizard in the SCA BB console to upgrade a system with dual Cisco SCE 8000-SCM

modules the same as for a single Cisco SCE 8000-SCM module system. See the

SCE Using the SCE Software Upgrade Wizard

Broadband User

Cisco SCE8000 10GBE Installation and Configuration Guide

9-28

Guide.

Chapter 9 Removal and Replacement Procedures

section in the

Cisco Service Control Application for

How to Upgrade the

OL-26784-02