Advanced Status Display; Cl-Led Display - ABB CL Series Applications Manual

1SVC 440 795 M0100
Retention/debounce
RE
: Retention switched on
I
: Debounce switched on
AC
: AC expansion functioning correctly
DC
: DC expansion functioning correctly
GW
: Bus coupling module detected
GW flashing: Only CL-LEC.CI000 detected. I/O expansion not detected.
17.03.04 Display of actual device date
ST
: When the power supply is switched on, the logic relay switches to STOP mode

Advanced status display

12...6.89...
RE I AC P-
17.03.04 ST
123.5.78 RUN

CL-LED display

CL-LSR.CX..., CL-LST.CX..., CL-LMR/CL-LMT, CL-LER and
CL-LET feature an LED on the front which indicates the status
of the power supply as well as the RUN or STOP mode
(a figure 2, Page 14).
LED OFF No power supply
LED continuously Power supply present, STOP mode
lit
LED flashing Power supply present, RUN mode
Overview
AC expansion ok/P buttons
Startup behaviour
19