Repair Service; Spare Parts; Technical Specifications - Grizzly ERM 1436 G Translation Of The Original Instructions For Use

antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is re-
turned to the merchant undismantled
and with proof of purchase and guar-
antee.

Repair Service

• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare parts

The following spares are available from
Grizzly Service-Center. Please indicate the
machine type and the number of the spare
part with your order.
Spare blade .............................. 13700232
Grass box ................................. 91095443

Technical Specifications

Electric Lawnmower ...........ERM 1436 G
Motor input power ......................... 1400 W
Mains voltage ......................230V~, 50 Hz
Idling speed ..............................3500 min
Blade width ..................... Approx. 360 mm
Cut height ........................ 20 / 40 / 60 mm
Protection class ...................................
Protection type.................................. IP 24
Weight ..............................................12 kg
Lawn box volume.................................40 l
Sound pressure specification
(L ) ...........................74 dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured .......... 94 dB(A), K
Vibration (a ) .............................. 2,07 m/s
n
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.
Technical and visual modifications may
be made without notice in the course
of further development. All dimensions,
information and specifications in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
operating instructions.
GB
-1
II
=1,99 dB
pA
(L )
wA
=1,99 dB
wA
2
47