Samsung OfficeServ 7400 Technical Manual page 120

OfficeServ 7400
TECHNICAL MANUAL
WALL-MOUNTING iDCS KEYSETS
iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset, remove
the wedge from the keyset and mount the wedge to the wall using one of the methods below
(see Figure 7.20).
Use screw holes 1 and 2 to attach the base wedge to a standard electrical outlet box.
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with locking pins.
This method can cause the keyset to wobble as the keyset feet do not fit securely to the
mounting surface.
WALL-MOUNTING DS, ITP-5121D and ITP-5107S KEYSETS
DS, ITP 5121D and ITP 5107S keysets come equipped with a reversible base stand. To wall-
mount a keyset, remove the base stand, reverse it, and attach stand in the bottom slots of the
keyset. Use screw holes 1 and 2 to attach the keysets to the wall
To secure the handset once you have wall-mounted your keyset, you must remove the
handset retaining clip and reverse it such that the extended clip is facing the top of the phone
(see Figure 7.21).
OR
1
2
3
Figure 7.20 Wall-Mounting an iDCS Keyset
7.16
Home Page Home Page
INSTALLATION
PART 7 MAY 2010
(see Figure 7.21).
Table of Contents Table of Contents