About Status Bar Icons; Remap A Button - Honeywell Dolphin CT40 Series User Manual

To learn how to

About Status Bar Icons

Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Icon

Remap a Button

You can change the default function of the Volume button (i.e., Volume up and
Volume down) and Scan buttons (i.e., Left, Right, and Front).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the plus sign (+).
4. Press the button you want to remap.
5. Tap OK.
6. Tap Keys or Apps or Actions or text to view the available functions.
7. Select the function you want assigned to the button. The function you selected
Dolphin CT40 Mobile Computer
Remap a
Description
Pending alarm and Alarm is set.
New text message or multimedia
message.
Error with text or multimedia message
delivery.
New email
Computer is connected to a PC with a
USB cable.
Synchronizing data.
Error with sync or sign-in.
Computer is connected with Ethernet.
> Honeywell Settings > Key Remap.
now appears next to the button name.
Button, see page 23.
Icon Description
Vibrate mode is turned on.
Airplane mode is turned on.
Bluetooth is turned on.
SD card is full.
Wi-Fi network connected with full signal
strength.
Wi-Fi network connected but no signal
strength.
Phone connected with full amount of
bars.
Phone connected with full amount of
bars but no Internet connection.
23