Install Software Apps With Autoinstall; Optional Microsd Card Method - Honeywell Dolphin CT40 Series User Manual

Install Software Apps with AutoInstall

Important: The Dolphin CT40 must have power for the entire length of the install process or it
could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the Android application file (*.zip or *.apk) in one of the following folders
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.

Optional microSD Card Method

The CT40 comes equipped with a microSD card socket. You can install an upgrade
from a microSD card you insert in the computer.
Important: The Dolphin CT40 must have power for the entire length of the install process or it
could become unstable. Do not attempt to remove the battery during the process.
1. On the CT40, swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Tap AutoInstall Settings
5. Press and hold the Power button, and then tap Power off.
76
> Honeywell Settings > Provisioning mode.
on the CT40 mobile computer:
• Internal shared storage\honeywell\autoinstall
Files saved to this folder for installation, do not persist when a Full factory
reset or Enterprise data reset is performed.
IPSM card\honeywell\autoinstall
•
Files saved to this folder for installation, do not persist when a Full factory
reset is performed. However, the software does persist if an Enterprise data
reset is performed.
If required by the app, the computer may automatically initiate a reboot before
starting the installation process. When the installation is finished, a message
appears or the unit finishes rebooting and the lock screen appears.
>Honeywell Settings > Provisioning mode.
and verify Autoinstall is enabled
. Verify Autoinstall is enabled
Dolphin CT40 Mobile Computer
.
.