NEC Electra Elite IPK II System Hardware Manual page 414

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 8
Remove Screw
Figure 9-10 Removing AD(A)-R Unit Cover
3. Locate the adapter terminals on the unit.
4. Remove the cap on the adapter terminal to expose the metal
receptacle. Push the cable in the applicable receptacle, and
replace the cap. Line up the slot on the cap with the slot on the
metal receptacle to ensure proper contact. Refer to
Attaching Cables to the AD(A)-R
Attach the cables to the AD(A)-R Unit according to
AD(A)-R Unit Cable
Figure 9-11 Attaching Cables to the AD(A)-R Unit
Installing Electra Elite IPK II Optional Terminal Equipment
Unit.
Connections.
Electra Elite IPK II
Figure 9-11
Table 9-1