Breville LMC600 Instruction Book page 24

10. Add the tinned tomatoes, beef stock and
mixed herbs. Season with salt and pepper.
11. Close the lid.
12. The unit will beep 4 times at the end of each
stage. At the end of stage 4, the unit will beep
4 times and then display the
icon.
13. Open the lid and stir through the gravy
powder to thicken slightly. Season if required.
14. Serve on top of the cooked spaghetti and
garnish with fresh parmesan.
BREAD FUNCTION
The BREAD function uses the bread baking pan.
When the bread pan is inserted into the multi
cooker, these functions will illuminate on the
display. Alternatively, press the BREAD button
to activate.
This multi cooker has 7 different options for
baking bread: White, Whole Wheat, French,
Sweet, Gluten Free, Rapid and Homemade.
Each of these settings require the use of the
kneading blade.
The BREAD BAKING function, except Gluten
Free and Rapid, also allow the choice of Loaf
Size (900g, 680g, 450g) and Crust Colour
(Dark, Med, Light).
This multi cooker also offers 6 options for using
the bread pan for non-bread functions: Cake,
Dough, Pasta Dough, Bake, Yoghurt and Jam.
NOTE
• Bake can be used on its own or to add
additional time to bread baking.
• The RAPID bread selection makes a loaf of
bread in less time. Selecting Rapid will bake a
bread loaf to a medium crust colour and reduce
the finishing time by about an hour.
• For best results when using the Rapid setting,
increase the yeast content in the bread recipe by
¼ teaspoon.
24
LMC600_ANZ_IB_D19.indd 24
1. Place the bread pan on a dry, level surface.
2. If the kneading blade is required, align the
semi-circle on the top of the kneading blade
to the one on top of the drive shaft and slide
the blade down to the base of the bread pan.
COMPLETED
3. Place all the ingredients into the bread pan
in proper measurements and in correct order
as per the recipe being used, noting that
for bread making, the order of inclusion is
important to a successful loaf.
4. Use the handle to lift the pan and place into
the base of the multi cooker, aligning the legs
on the bottom of the pan with the notches in
the bottom of the multi cooker.
5. Twist the pan slightly clockwise to secure.
Pull up lightly on the handle and if the pan
does not come away, the bread pan is locked
in place.
6. Lower the handle, then close the lid.
7. The BREAD functions will illuminate on
the display screen ready for programming
or, alternatively, press the BREAD button.
NOTE
The bread pan must be properly locked in
place in the multi cooker to operate. If the
bread pan is not in the multi cooker, or not
locked in correctly, an "E04" message will
display, and the unit will not operate when
programming. Press the START/CANCEL
button or fit the bread pan correctly to cancel
the "E04" message.
5/9/19 4:06 pm