Designation Of Parts; Specifications; Assembly; Installing Or Removing The Battery Cartridge To The Battery Holder - Makita DFJ202 Instruction Manual

Tips for maintaining
maximum battery life
• Never recharge a fully charged
battery cartridge. Overcharging
shortens the battery service life.
• Charge the battery cartridge
with room temperature at 10°C -
40°C (50°F - 104°F).
• Let a hot battery cartridge cool
down before charging it.
• Charge the battery cartridge if
you do not use it for a long
period (more than six months).
• For an optimum life-time, the
battery cartridge has to be fully
charged, after use.
SAVE THESE
INSTRUCTIONS.
(See the last part of this instruction manual for all the
illustrations.)
DESIGNATION OF PARTS (Fig. 1 & 2)
DFJ202, DFJ203, DFJ300, DFJ301 (Fig. 1)
(1) Loop for name badge
(2) Loop for arm badge
(3) Sleeve holder
(4) Battery pocket
(5) Fan hook
(6) Snap button
(7) Fan unit
(8) Power cable
For DFJ203 and DFJ301 only
(9) Anti-slip rubber
(10) Hood
DFJ400, DFJ401 (Fig. 2)
(1) Loop for name badge
(2) Loop for arm badge
(3) Sleeve holder
(4) Battery pocket
(5) Fan hook
(6) Snap button
(7) Fan unit
(8) Power cable
(11) Shoulder pad
(12) Mesh pocket for ice pack
For DFJ401 only
(9) Anti-slip rubber
(10) Hood

SPECIFICATIONS

Power (All models)
USB power supply port
Rated voltage (V)
Battery cartridge
Operating time (approximate hour)
with
Air speed
BL1041B
1 16 hours
2 11 hours
3 6.0 hours
NOTE:
BL1460B battery is not available in some countries.
Material
DFJ202 Outer material: Polyester (100%)
DFJ203 Inner material: Polyester (100%)
Pocket: Cotton (100%)
DFJ300 Outer material: Cotton (100%)
DFJ301 Inner material: Polyester (100%)
Pocket: Cotton (100%)
DFJ400 Outer material: Polyester (100%) + titanium
DFJ401
Inner material: Polyester (100%)
Pocket: Cotton (100%)
Shoulder pad: Polyester (65%)+Cotton
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Operating time may differ depending on battery type,
charging status, and usage condition.

ASSEMBLY

Installing or removing the battery
cartridge to the battery holder (Fig. 3)
CAUTION:
• Hold the battery holder and the battery cartridge
firmly when installing or removing battery
cartridge. Failure to hold the battery holder and the
battery cartridge firmly may cause them to slip off
DC 5V, 2.1A, Type A
DC 10.8V - 12V max
DC 14.4V
DC 18V
10.8V
BL1016, BL1021B, BL1041B
14.4V
BL1430B, BL1430, BL1460B
18V
BL1815N, BL1820B, BL1830,
BL1830B, BL1840B, BL1850B,
BL1860B
with with
BL1460B BL1860B
21 hours 34 hours
16 hours 25 hours
8.5 hours 14 hours
pearly coating
(35%)
5