Set Ip Precedence - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands

34.1.42 set ip precedence

Use this command to set the precedence of the IP head of the packet matching the rule in
the route map configuratio mode. Use the no form of this command to remove the
configured precedence setting.
set ip precedence {<0-7> | critical | flash | flash-override | immediate | internet | network |
priority | routine }
no set ip precedence {<0-7> | critical | flash | flash-override | immediate | internet |
network | priority | routine }
Default
configuration
Command
mode
Usage
guideline
Examples
Chapter 34 Protocol-independent Configuration Commands
Command
route-map
match ip address
set default interface
set interface
set ip default next-hop
set ip precedence
N/A
Route map configuration mode
With different precedence values for the IP packet head
configured, the IP packets matching the PBR routing are
sent accoding to the different precedence values.
Multiple set ip precedence commands can be executed
in the route map configuration rule, but only the last one
takes effect, and the precedence will be specified for the
head of the IP packet matiched the PBR.
The following example sets the precedence of the packet
with the source IP address 192.168.217.68 received at the
interface FastEthernet 0/0 as 4:
Description
Define the route map.
Match the IP address.
Set the default outgoing
interface.
Set the outgoing interface.
Set the default next hop.
Set the priority of the packets.
34-59