Dot1X Timeout Server-Timeout - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
44.2.3

dot1x timeout server-timeout

Use this command to set the authentication timeout between the device and the
authentication server. Use the no form of the command to restore it to the default setting.
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Re-authen Max:
Maximum Request:
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Command Description
show dot1x Show the information about 802.1x.
Parameter Description
Authentication timeout between the device and
seconds the authentication server. The range is 0 to
65535 seconds.
5 seconds.
Global configuration mode.
Use show dot1x command to show 802.1X configuration.
The following example sets the authentication timeout of the
authentication server to 10s:
DES-7210# configure terminal
DES-7210(config)# dot1x timeout server-timeout 10
DES-7210(config)# end
DES-7210# show dot1x
802.1X Status:
Authentication mode:
Authed User Number:
Re-authen Enabled:
Re-authen Period:
Quiet Timer Period:
Chapter 44 802.1X Configuration Commands
3 times
3 times
Disabled
Disabled
Group Server
Enabled
EAP-MD5
0
Disabled
1000 sec
1000 sec
44-7