For Djr186 - Makita DJR187 Technical Information

[7] Remove Gear complete (Spiral bevel gear 47) from Slider.
Gear complete (Spiral bevel gear 47)

5-4-1-2

For DJR186

[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove Rotor ass'y (Armature ass'y). (Refer to 5-3 Rotor ass'y (Armature ass'y).)
[3] Loosen sevenM4x16 Pan head screws, and remove Gear housing R complete.
Note: Roller may be attached on Gear housing R complete.
[4] Loosen M4x8 Hex socket head bolt, and remove Flat washer 4. (Fig. 5-4-1-1-3)
[5] Remove the assembled part of Gear complete and Slider. (Fig. 5-4-1-1-4)
[6] Remove Gear complete (Spiral bevel gear 44) from Slider. (Fig. 5-4-1-1-5)
Fig. 5-4-1-1-5
Pin 6
Fig. 5-4-1-2-1
M4x16 Pan head
screw (7 pcs.)
Gear housing R
complete
18 / 24
Roller
Slider
Roller
Roller