Makita DJR187 Technical Information page 13

[6] Loosen four M5x25 Pan head screws, and remove Motor housing section.
[7] Loosen twoM4x16 Pan head screws, and remove Rotor ass'y.
Note: If it is hard to remove Rotor ass'y, warm Gear housing L assembly with a heat gun.
M4x16 Pan head
screw (2 pcs.)
Fig. 5-3-1-1-7
[8] Remove Retaining ring S-12 with 1R291.
1R291
Fig. 5-3-1-1-5
M5x25 Pan head
screw (4 pcs.)
Motor housing section
Fig. 5-3-1-1-6
Retaining ring
S-12
Rotor ass'y
Fig. 5-3-1-1-8
[9] Remove Ball bearing 6201DDWwith 1R269, and remove Flat
washer 12 and Bearing retainer 66.
1R269
Bearing
retainer 66
13 / 24
Ball bearing 6201DDW
Flat washer 12
Ball bearing
6201DDW
Retaining
ring S-12