Makita DJR187 Technical Information page 10

Fig. 5-2-2-6 Fig. 5-2-2-7
[6] Remove Guide sleeve. [7] Set Driving sleeve to Sleeve while fitting its two projections to
the two concaves of Sleeve.
Driving sleeve
Viewed from the bottom
Guide sleeve
Projections
Concaves of
Sleeve
Fig. 5-2-2-8
[8] While push Driving sleeve into Gear housing, turn the sleeve clockwise to lock Pin 3 in place. Then, remove Driving sleeve.
Driving sleeve
Sleeve
Pin 3
10 / 24