GE LOGIQ A3 Basic Service Manual
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Medical Equipment
  5. LOGIQ A3
  6. Basic service manual
GE LOGIQ A3 Basic Service Manual

GE LOGIQ A3 Basic Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Document Information for:
Type
Name
Revision
State
ECO
Description
Originator
File List
1. 5213326-100TPH_s2_r1.pdf
Approval Information
Person
305018343_seshachala__bettadapu r a
305018956_sandesh__n
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 1 of 252
5213326-100TPH
Draw i ng Print
5213326-100TPH
3
Release
2063269
Basic Serv i ce Manu a l for LOGIQ Uno Console
501568001_prav e en__ku m ar
This page is generated automatically by the GEMS ePDM System
Printed documents are for Reference Only and may be out-of-date.
Check the database to ensure you have the correct revision.
Action
Date and Time
Approv e d
09/10/2008 12:58:08 PM GMT
Approv e d
09/11/2008 05:05:00 AM GMT

Advertisement

Table of Contents
loading

Related Manuals for GE LOGIQ A3

Summary of Contents for GE LOGIQ A3

  • Page 1 Document Information for: 5213326-100TPH Type Draw i ng Print Name 5213326-100TPH Revision State Release 2063269 Description Basic Serv i ce Manu a l for LOGIQ Uno Console Originator 501568001_prav e en__ku m ar File List 1. 5213326-100TPH_s2_r1.pdf Approval Information Person Action Date and Time 305018343_seshachala__bettadapu r a...
  • Page 2 GE Healthcare Technical Publication Direction 5213326-100 Revision 3 GE Healthcare LOGIQ A3 Basic Service Manual Operating Documentation © Copyright 2007,2008 by General Electric Co. Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 2 of 252...
  • Page 3 This page was intentionally left blank. Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 3 of 252...
  • Page 4 NACHVOLLZIEHEN KÖNNEN. • WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN DURCH ELEKTRISCHE SCHLÄGE, MECHANISCHE ODER SONSTIGE GEFAHREN KOMMEN. Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 4 of 252...
  • Page 5 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL • ESTE MANUAL DE SERVICIO SÓLO ESTÁ DISPONIBLE EN INGLÉS. • SI ALGÚN PROVEEDOR DE SERVICIOS AJENO A GEMS SOLICITA UN IDIOMA QUE NO SEA EL INGLÉS, LA TRADUCCIÓN ES RESPONSABILIDAD DEL CLIENTE.
  • Page 6 ΣΤΟΝ ΑΣΘΕΝΗ ΑΠΟ ΗΛΕΚΤΡΟΠΛΗΞΙΑ, ΜΗΧΑΝΙΚΟΥΣ Ή ΑΛΛΟΥΣ ΚΙΝ∆ΥΝΟΥΣ. • EZEN KARBANTARTÁSI KÉZIKÖNYV KIZÁRÓLAG ANGOL NYELVEN ÉRHETŐ • HA A VEVŐ SZOLGÁLTATÓJA ANGOLTÓL ELTÉRŐ NYELVRE TART IGÉNYT, AKKOR A VEVŐ FELELŐSSÉGE A FORDÍTÁS ELKÉSZÍTTETÉSE. • NE PRÓBÁLJA ELKEZDENI HASZNÁLNI A BERENDEZÉST, AMÍG A FIGYELMEZTETÉS KARBANTARTÁSI KÉZIKÖNYVBEN LEÍRTAKAT NEM ÉRTELMEZTÉK.
  • Page 7 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL • TENTO SERVISNÍ NÁVOD EXISTUJE POUZE V ANGLICKÉM JAZYCE. • V PŘÍPADĚ, ŽE POSKYTOVATEL SLUŽEB ZÁKAZNÍKŮM POTŘEBUJE NÁVOD V JINÉM JAZYCE, JE ZAJIŠTĚNÍ PŘEKLADU DO ODPOVÍDAJÍCÍHO JAZYKA ÚKOLEM ZÁKAZNÍKA.
  • Page 8 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL • ŠIS EKSPLOATAVIMO VADOVAS YRA IŠLEISTAS TIK ANGLŲ KALBA. • JEI KLIENTO PASLAUGŲ TEIKĖJUI REIKIA VADOVO KITA KALBA – NE ANGLŲ, VERTIMU PASIRŪPINTI TURI KLIENTAS. • NEMĖGINKITE ATLIKTI ĮRANGOS TECHNINĖS PRIEŽIŪROS DARBŲ, NEBENT VADOVAUTUMĖTĖS ŠIUO EKSPLOATAVIMO VADOVU IR JĮ...
  • Page 9 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL • ДАННОЕ РУКОВОДСТВО ПО ОБСЛУЖИВАНИЮ ПРЕДОСТАВЛЯЕТСЯ ТОЛЬКО НА АНГЛИЙСКОМ ЯЗЫКЕ. • ЕСЛИ СЕРВИСНОМУ ПЕРСОНАЛУ КЛИЕНТА НЕОБХОДИМО РУКОВОДСТВО НЕ НА АНГЛИЙСКОМ ЯЗЫКЕ, КЛИЕНТУ СЛЕДУЕТ САМОСТОЯТЕЛЬНО ОБЕСПЕЧИТЬ ПЕРЕВОД. • ПЕРЕД ОБСЛУЖИВАНИЕМ ОБОРУДОВАНИЯ ОБЯЗАТЕЛЬНО ОБРАТИТЕСЬ...
  • Page 10 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 10 of 252...
  • Page 11 GE Healthcare personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes.
  • Page 12 The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE Healthcare. GE Healthcare may revise this publication from time to time without written notice. TRADEMARKS All products and their name brands are trademarks of their respective holders.
  • Page 13 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Revision History Revision Date Reason for change 05 Aug 2007 Initial Release 28 Jan 2008 Revised to add a section on Service Diagnostics Added sections on: Troubleshooting guide and Netowrk Connectivity...

  • Page 14: Table Of Contents

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Table Of Contents CHAPTER 1 Overview............1 - 1 Purpose .
  • Page 15 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 2 Overview ............2 - 1 Purpose .
  • Page 16 Receiving and Unpacking LOGIQ A3 ........
  • Page 17 GE Cares Sticker ........
  • Page 18 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 4 Overview............4 - 1 Purpose .
  • Page 19 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 5 Overview ............5 - 1 Purpose of Overview .
  • Page 20 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 6 Overview............6 - 1 Purpose .
  • Page 21 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 7 Overview ............7 - 1 Purpose .
  • Page 22 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL CHAPTER 8 Overview............8 - 1 Purpose .
  • Page 23 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Needed Manpower ........8 - 14 Preparations .
  • Page 24 Functional Checkout Procedure ......8 - 31 LH Arm Cover Front with GE Logo (FRU P/N # 5263193) / RH Arm cover Front with Labels (FRU # 5263420) .
  • Page 25 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Right EMI Cover (Part of EMI Cover Assy FRU P/N # 5264421) ..8 - 38 Tools ..........8 - 38 Needed Manpower .
  • Page 26 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Removal Procedure ........8 - 48 Functional Checkout Procedure .
  • Page 27 LOGIQ A3 Configuration ........
  • Page 28 Standard GE Tool Kit ........
  • Page 29 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Definition ..........10 - 20 Generic Procedure .

  • Page 30: Overview

    8.) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly procedures for all changeable Field Replaceable Units (FRU). 9.) Chapter 9 - Renewal Parts: Contains a complete list of replacement parts for the LOGIQ A3. 10.)Chapter 10 - Care & Maintenance:Provides periodic maintenance procedures for the LOGIQ A3.

  • Page 31: Typical Users Of The Basic Service Manual

    WARNING CAREFULLY READ ALL OF THE WARNINGS BELOW 1.) The operator manual should be fully read and understood before operating the LOGIQ A3 and kept nearby for quick reference. 2.) Although the ultrasound energy transmitted from the LOGIQ A3 transducer is within AIUM/NEMA standards, unnecessary exposure should be avoided.

  • Page 32: Important Conventions

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 1-3Important Conventions 1-3-1 Conventions Used in Book Icons Pictures, or icons, are used wherever they reinforce the printed message. The icons, labels and conventions used on the product and in the service information are described in this chapter.

  • Page 33: Standard Hazard Icons

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 1-3-2 Standard Hazard Icons Important information will always be preceded by the exclamation point contained within a triangle as seen throughout this chapter. In addition to text, several different graphical icons (symbols) may be used to make you aware of specific types of hazards that could cause harm.

  • Page 34: Product Icons

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 1-3-3 Product Icons The following table describes the purpose and location of safety labels and other important information provided on the equipment. Table 1-4 Product Icons LABEL/SYMBOL PURPOSE/MEANING...
  • Page 35 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Table 1-4 Product Icons (Continued) LABEL/SYMBOL PURPOSE/MEANING LOCATION "OFF/Standby" Indicates the power off/standby position of the power switch. CAUTION Adjacent to On-Off/Standby Switch This Power Switch DOES NOT ISOLATE Mains Supply "Mains ON"...

  • Page 36: Introduction

    1-4-2 Human Safety Operating personnel must not remove the system covers. Servicing should be performed by authorized personnel only. Only personnel who have participated in a LOGIQ A3 Training Seminar are authorized to service the equipment. 1-4-3 Mechanical Safety WHEN THE UNIT IS RAISED FOR A REPAIR OR MOVED ALONG ANY INCLINE, USE EXTREME CAUTION SINCE IT MAY BECOME UNSTABLE AND TIP OVER.

  • Page 37: Electrical Safety

    If the Power Plug is Modified or replaced to Suit the local Conditions and regulations, Ground CAUTION continuity check should be performed between Ground Pin on the Plug and a Metal Part on the LOGIQ A3. 1-4-5 Returning/Shipping Probes and Repair Parts Equipment being returned must be clean and free of blood and other infectious substances.
  • Page 38 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 1-5Warning Label Locations Figure 1-1 Label Location Chapter 1 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 38 of 252...

  • Page 39: Warning Label Locations

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) Figure 1-2 Transport Label Figure 1-3 Gender Caution Label 1-10 Section 1-5 - Warning Label Locations Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 39 of 252...
  • Page 40 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) Figure 1-4 Rating Plate Label Chapter 1 1-11 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 40 of 252...
  • Page 41 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) Figure 1-5 Caution Label Figure 1-6 EIAJ Label (Japan Only) 1-12 Section 1-5 - Warning Label Locations Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 41 of 252...
  • Page 42 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) Figure 1-7 Gost Label Figure 1-8 TUV Label Figure 1-9 Circuit Breaker Label Chapter 1 1-13 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 42 of 252...
  • Page 43 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) Figure 1-10 Circuit Breaker Panel Rating Label Figure 1-11 Front Panel Rating Label Figure 1-12 Grounding Label 1-14 Section 1-5 - Warning Label Locations...
  • Page 44 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Warning Label Locations (continued) L 11 Figure 1-13 Mercury Label L 13 Figure 1-14 ROHS Label Chapter 1 1-15 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 44 of 252...
  • Page 45 Council Directive 93/ D18: Signal ground point label CAUTION: This is 42/EEC only for “FUNCTIONAL GROUNDING”, NOT D10: CISPR CAUTION: The LOGIQ A3 conforms “PROTECTIVE EARTH”. L11 (Figure 1-13) to the CISPR11, Group 1, Class A of the...

  • Page 46: Dangerous Procedure Warnings

    1-6-3 CE Compliance The LOGIQ A3 unit conforms to all applicable conducted and radiated emission limits and immunity from electrostatic discharge, radiated and conducted RF fields, magnetic fields and power line transient requirements. Applicable standards are: 47CFR Part18, IEC/EN 60601-1-2...

  • Page 47: Customer Assistance

    Ultrasound Service Engineering FAX: +1- 414-647-4125 4855 W. Electric Avenue Milwaukee, WI 53219 TEL: 65-291 8528 ASIA(Singapore/Japan): (81) 426-48-2950 GE Ultrasound Asia (Singapore) Service Department - Ultrasound FAX: 65-272-3997 298 Tiong Bahru Road #15-01/06 FAX: (81) 426-482902 Central Plaza Singapore 169730...

  • Page 48: System Manufacturer

    IRECTION EVISION ERVICE ANUAL 1-7-2 System Manufacturer Table 1-6 System Manufacturer WIPRO GE HEALTHCARE PVT LIMITED- INDIA WIPRO GE HEALTHCARE PVT LIMITED, NO: 4, KADUGODI INDUSTRIAL AREA, BANGALORE,KARNATAKA, INDIA-560067. TEL: (91) 80-4180-1000 FAX:(91) 80-2845-2924 Chapter 1 1-19 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 48 of 252...

  • Page 49: Direction 5213326-100, Revision 3 Logiq™ A3 Service Manual

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 1-20 Section 1-7 - Customer Assistance Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 49 of 252...

  • Page 50: Overview

    Section 2-1Overview 2-1-1 Purpose This chapter provides the information required to plan and prepare for the installation of a LOGIQ A3. Included are descriptions of the facility and electrical needs to be met by the purchaser of the unit. 2-1-2 Table Of Contents S.No...

  • Page 51: General Console Requirements

    2-2-1-1 Cooling The cooling requirement for the LOGIQ A3 is 1366 BTU/hr. This figure does not include cooling needed for lights, people, or other equipment in the room. Each person in the room places an additional 300 BTU/hr. demand on the cooling system.

  • Page 52: Electrical Requirements

    2-2-2 Electrical Requirements NOTE: GE Medical Systems requires a dedicated power and ground for the proper operation of its Ultrasound equipment. This dedicated power shall originate at the last distribution panel before the system. Sites with a mains power system with defined Neutral and Live: The dedicated line shall consist of one phase, a neutral (not shared with any other circuit), and a full size ground wire (not shared with any other circuit) from the distribution panel to the Ultrasound outlet.

  • Page 53: Unit Power Plug

    Power Requirements (cont’d) 2-2-3-4 Unit Power Plug If the unit arrives without the power plug, or with the wrong plug, you must contact your GE dealer or the installation engineer must supply what is locally required. 2-2-3-5 Power Stability Requirements Voltage drop-out / Max 10 ms.

  • Page 54: Probes Environmental Requirements

    Site preparation takes time. Begin Pre-installation checks as soon as possible. If possible, allow six weeks before delivery, for enough time to make necessary changes. Have two people available to deliver and unpack the LOGIQ A3. CAUTION Attempts to move the unit considerable distances or on an incline by one person could result in injury or damage or both.

  • Page 55: Facility Needs

    2-3-2 Required Features NOTE: GE Medical Systems requires a dedicated power and ground for the proper operation of its Ultrasound equipment. This dedicated power shall originate at the last distribution panel before the system. Sites with a mains power system with defined Neutral and Live: The dedicated line shall consist of one phase, a neutral (not shared with any other circuit), and a full size ground wire from the distribution panel to the Ultrasound outlet.

  • Page 56: Desirable Ultrasound Room Facilities

    ERVICE ANUAL 2-3-2 Required Features (cont’d) NOTE: The LOGIQ A3 has three outlets in the unit. One is for the on board peripheral and two for off board peripherals. • Power outlets for other medical equipment • Power outlets for test equipment and modem within 1 m (3.2 ft) of unit •...

  • Page 57: Minimal Floor Plan Suggestion

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 2-3-2-2 Minimal Floor Plan Suggestion Figure 2-1 Minimal Floor Plan Section 2-3 - Facility Needs Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 57 of 252...

  • Page 58: Overview

    3-1-2 Table Of Contents Table 3-1 Contents in Chapter 3 S.No Description Page Number Overview Receiving and Unpacking LOGIQ A3 Safety Reminders 3-10 Moving into Position 3-10 Adjusting System Clock 3-10 Product Locator Installation Card 3-11...

  • Page 59: Average Installation Time

    Scanner wo/options Approximately 0.5 hour Dependant on the required configuration The LOGIQ A3 including options has been designed to be installed and checked out by an experienced service technician in approximately Four hours. NOTE: For Installing Options average installation time is approximately between 0.5 - 2hrs depending...
  • Page 60 3.) Handling Incomplete or Damaged Shipment Please read these procedures before packing/unpacking the LOGIQ A3. We strongly advice you to store the LOGIQ A3 packing material in undamaged condition in case of future transportation. Do not lift the unit by the Keyboard. This may cause equipment damage.

  • Page 61: Receiving And Unpacking Logiq A3

    (cont’d) 1.) Remove all the Metal locks to dismantle the plywood packing. Figure 3-1 The metal bands to be removed Section 3-2 - Receiving and Unpacking LOGIQ A3 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 61 of 252...
  • Page 62 IRECTION EVISION ERVICE ANUAL Section 3-2 Receiving and Unpacking LOGIQ A3 (cont’d) 2.) Lift the TOP Cover up and off. Figure 3-2 Removing the top cover Chapter 3 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 62 of 252...
  • Page 63 ANUAL Section 3-2 Receiving and Unpacking LOGIQ A3 (cont’d) 3.) Remove the Front plywood... Figure 3-3 Removing the front plywood Section 3-2 - Receiving and Unpacking LOGIQ A3 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 63 of 252...
  • Page 64 EVISION ERVICE ANUAL Section 3-2 Receiving and Unpacking LOGIQ A3 (cont’d) 4.) Move the slide plywoods to make space for placing the ramp. 5.) Remove the internal foams carefully. 6.) Place the top cover as shown in the figure 3-4 below to form the ramp to put the console down.
  • Page 65 (cont’d) 7.) Unlock the brakes on the front castors, then carefully put the console off the Palette. 8.) Remove the Plastic Wrapping around the LOGIQ A3. Figure 3-5 Moving the LOGIQ A3 from the crate Section 3-2 - Receiving and Unpacking LOGIQ A3...

  • Page 66: Safety Reminders

    Do not operate this unit unless all board covers and frame panels are securely in place. System performance and cooling require this. CAUTION OPERATOR MANUAL(S) The User Manual(s) should be fully read and understood before operating the LOGIQ A3 and CAUTION kept near the unit for quick reference. ACOUSTIC OUTPUT HAZARD...

  • Page 67: Moving Into Position

    Do not lift the console by holding any covers. CAUTION In general, a single adult can move the LOGIQ A3 along an even surface with no steep grades. At least two people should move the machine when large humps, grooves, or grades are encountered. (It is better to pull from the rear rather than push from the front of the unit).

  • Page 68: Preparing For Installation

    Systems Voltage Settings Verify that the recieved scanner is set to the correct voltage. The Voltage ratings for the LOGIQ A3 Scanner is found on Rating label near the Circuit Breaker at the rear of the system CONNECTING A LOGIQ A3 SCANNER TO THE WRONG VOLTAGE LEVEL WILL...

  • Page 69: Completing The Installation

    Physical Dimensions The physical dimensions of the LOGIQ A3 unit are summarized in Table 3-4 on page 12 The Size of LOGIQ A3, with monitor and peripherals is shown in Figure 3-7 on page 12 Table 3-4 Physical Dimension of LOGIQ A3...

  • Page 70: Weight With Monitor And Without Peripherals

    5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-4-1-2 Weight with Monitor and without Peripherals The Weight of LOGIQ A3 with monitor, without peripherals Table 3-5 Weight of LOGIQ A3 Model Weight [Kg] Weight [lbs] LOGIQ A3 3-4-1-3 Acoustic Noise Output: Less than 70dB (A) according to DIN 45635 - 19 - 01 - KL2.

  • Page 71: Power On / Off Process

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-4-4 Power On / Off Process NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be able to boot if power is recycled too quickly.

  • Page 72: System Boot Up

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-4-4-2 System Boot Up Press the Power On/Off switch on the Control Panel once. Figure 3-9 Power On/Off Switch for Back-end Processor Boot Up 1-Power ON/OFF Switch When the Power On/Off switch on the Control Panel is pressed once, the Power is distributed to the Front-End, to the Peripheral outlets and to the Master Board at Back End.

  • Page 73: Power Off/ Shutdown

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-4-5 Power Off/ Shutdown NOTE: After turning off a system, wait at least ten seconds before turning it on again. The system may not be able to boot if power is recycled too quickly.

  • Page 74: Scanner Shutdown

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-4-5-2 Scanner Shutdown Figure 3-10 Circuit Breaker and Power Cable on Back of Scanner A- Circuit Breaker B- Power cable 1.) Switch OFF the Circuit Breaker at the back of the system.

  • Page 75: System Configuration

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 3-5System Configuration 3-5-1 System Configuration 3-5-1-1 System Settings Table 3-1 System Configuration Configuration Category Description Enables the user or service personnel to set the date, time, unit, language, basic information about...
  • Page 76 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 3-6Network Connectivity You use Connectivity functionality to set up the connection and communication protocols for the ultrasound system. This page gives an overview of each of the connectivity functions.

  • Page 77: Network Connectivity

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 3-6 Network Connectivity (cont’d) Check the availability of Internet Information Services by following below steps: 1.) Select “Start->Control Panel” Figure 3-1. Control Panel 2.) Select “Administrative Tools” from control panel window.
  • Page 78 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 3-6 Network Connectivity (cont’d) 3.) Select “Internet Information Services” from Administrative tools. Figure 3-3. Internet Information Services 4.) Double click on Internet Information Services. Select “FTP sites” under “local computer” of “Internet Information Services”...
  • Page 79 Figure 3-5. Static IP Address Setup Enter IP address (for eg:3.245.71.173), and enter subnet mask as “255.255.255.0”. 6.) Now connect ethernet cable between the LOGIQ A3 System and remote PC. To enable the network connectivity, select “Utility-> Measurement->Enable Network” option.

  • Page 80: Storage And Operation Requirements

    See the Internal and External I/O description in Chapter 5. 3-8-1-1 Approved peripherals The below table shows the suggested optional peripherals for LOGIQ A3. CD Drive is the only On- board peripheral. All other peripherals are Off-board. Table 3-2 List of Recording Devices...

  • Page 81: Connecting Cables

    Connecting Cables Equipment damage possibility. Be sure to use the following recommended connecting cables to connect recording devices and a network with LOGIQ A3 console.Failure to do so would result CAUTION in unstable system behaviour and can possibly damage the Equipment...

  • Page 82: Available Probes

    PBT: Polybutylene Terephthalate ABS: Acrylonitrile Butadiene Styrene 3-8-3 Peripherals/Accessories Connector Panel Connection to the Peripherals and Accessories can be established by connecting to the LOGIQ A3 Rear panel. The Rear Panel of LOGIQ A3 Consists of following connectors to connect peripherals.
  • Page 83 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-8-3 Peripherals/Accessories Connector Panel (cont’d) 5)VGA Connector Figure 3-11 Rear Panel Item Connector Name Table Number Description Table 3-8 4 pin mini-DIN S-Video Out Table 3-9 DSUB-HD22 15 Pin female...
  • Page 84 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-8-3 Peripherals/Accessories Connector Panel (cont’d) 1.) S-Video Connector - 4Pin mini-DIN Table 3-8 S-Video Connector, 4 Pin Pin No Output Signal Description Picture SVIDEO OUT/IN YG Y (Luma) GND...
  • Page 85 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 3-8-3 Peripherals/Accessories Connector Panel (cont’d) 4.) Pin Assignment of USB1 & USB2Connector: USB Pin No. Signal Pin No. Signal Picture +5 VDC DATA + DATA - Table 3-11 Pin Assignments of USB...
  • Page 86 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 3-9Paper work NOTE: During and after installation, the documentation (i.e. User Manuals, Installation Manuals...) for the peripheral units must be kept as part of the original system documentation. This will ensure that all relevant safety and user information is available during the operation and service of the complete system.

  • Page 87: Paper Work

    ERVICE ANUAL 3-9-2 GE Cares Sticker Stick GE CARES sticker after Installation. Refer Figure 3-12 for details. InSite is not supported in Logiq A3, hence is not applicable. NOTE: Figure 3-12 GE CARES Sticker Location 3-9-3 User Manual(s) 1.) User: Check that the correct User Manual(s) for the system and software revision, is included with the installation.

  • Page 88: Overview

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 4Functional Checks Section 4-1Overview 4-1-1 Purpose This chapter provides procedures for quickly checking major functions of the LOGIQ™ A3 scanner diagnostics by using the built-in service software, and power supply adjustments.

  • Page 89: General Procedure

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 4-3General Procedure SYSTEM REQUIRES ALL COVERS CAUTION Operate this unit only when all board covers and frame panels are securely in place. The covers are required for safe operation, good system performance and cooling purposes.

  • Page 90: Functional Checks

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 4-4Functional Checks 4-4-1 Basic Controls 4-4-1-1 Alpha Numeric Keyboard Table 4-2 Keyboard Task Expected Result Exit current display screen. 4-4-1-2 Keyboard Controls Table 4-3 Keyboard Controls Task...

  • Page 91: B Mode Checks

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-2 B Mode Checks 4-4-2-1 Preparations 1.) Connect one of the probes listed in Available Probes of Chapter - Installation to the system probe connector. 2.) Turn ON the scanner (if it isn’t turned on already)) 3.) Perform the “Screw driver Test”...

  • Page 92: B Mode Op Panel Controls

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-2-2 B Mode OP Panel Controls Table 4-4 B Mode Control Panel Controls S.No Task Expected Result(s) Press B Mode key B Mode Starts Adjust the field of view. Increasing the depth may view larger/deeper structures rates, and Adjust Depth decreasing the depth may view near the skin line.Turn Depth right/left to increase/decrease.

  • Page 93: M Mode Controls

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-3 M Mode Controls 4-4-3-1 Preparations 1.) Connect one of the probes listed in Available Probe of Chapter-Installation to the system probe connector. 2.) Turn ON the scanner (if it isn’t turned on already)

  • Page 94: M Mode Op Panel Controls

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-3-2 M Mode OP Panel Controls Table 4-6 M Mode OP Panel Controls Step Task Expected Result(s) Press M Mode key M Mode Starts Controls the amount of echo information displayed in an image.

  • Page 95: Measurement And Multi Image Checks

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-4 Measurement and Multi Image Checks 4-4-4-1 Performing B Mode Measurements Checks Figure 4-3 Measurement Keys Table 4-8 Measurement Checks Step Task Expected Result(s) Generate the B image.

  • Page 96: Basic Measurements

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-5 Basic Measurements NOTE: The following instructions assume that you first scan the patient and then press Freeze. 4-4-5-1 Distance and Tissue Depth Measurements 1.) Press MEASURE once; an active caliper displays.

  • Page 97: Probe/Connectors Usage

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-6 Probe/Connectors Usage 4-4-6-1 Connecting a probe 1.) Place the probe's carrying case on a stable surface and open the case. 2.) Carefully remove the probe and unwrap the probe cable.

  • Page 98: Using Cine

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-4-7 Using Cine 4-4-7-1 Activating CINE Press FREEZE, Then cine guage appears on the bottom of submenu. Use “Trackball” to move frame by frame or Gain key. Press “Numeric Key 2” to start cine loop.

  • Page 99: Presets Backup/Restore Checks

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 4-6Presets Backup/Restore Checks Check that preset Backup/Restore feature work as described below: 1.) Presets Backup: It allows to save presets on memorystick. 2.) Presets Restore: It allows to copy the presets from memory stick to the system.

  • Page 100: Safety Issues

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 4-7Safety Issues 4-7-1 Probe/Connectors Check Take the probes and check them as described below: Table 4-11 Probe and connectors check Step Task to do Expected Result(s) Test Each delivered Probe...

  • Page 101: Site Log

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 4-8Site Log Table 4-12 Site Log Date Service person Problem Comments 4-14 Section 4-8 - Site Log Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 101 of 252...
  • Page 102 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL This page was intentionally left blank. Chapter 4 4-15 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 102 of 252...
  • Page 103 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 4-16 Section 4-8 - Site Log Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 103 of 252...

  • Page 104: Overview

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 5Components and Functions Section 5-1Overview 5-1-1 Purpose of Overview This chapter explains LOGIQ™ A3’s system concepts, component arrangement, and subsystem function. It also describes the Power Distribution System (PDS) and probes.

  • Page 105: Types Of Applications

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-1-4 Types of Applications The LOGIQ™ A3 is a general imaging system which supports many clinical uses. Scan and display parameters may be user selected to default to desired values for each application. The system presets many parameters to clinically determined, optimal values.
  • Page 106 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 5-2Block Diagrams and Theory 5-2-1 Block Diagram Figure 5-2 LOGIQ™ A3 Block Diagram Chapter 5 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 106 of 252...

  • Page 107: Block Diagrams And Theory

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-2 Front End This module is mainly responsible for interface and control of ultrasonic transducer and also does the data delay summing on the received raw data. The processed data is send to Back end module for further DSP processing, display and storage.

  • Page 108: Probe Interface Pcb(Connector Board)

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-2-2 Probe Interface PCB(Connector Board) Logiq Uno Connector board is designed to support 64, 96 and 128-element probes. Depending on the scan line number, 48-specific elements out of 64/96/128 elements are connected to the respective TxRx sections.

  • Page 109: Back End Module

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-3 Back End Module The Back End Module consists following two PCB’s: 1.) System On Module 2.) Master Control Board 5-2-3-1 System On Module(SOM) This module consists of a System On Module (SOM), which is mainly responsible for backend processing and storing of patient data.
  • Page 110 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-3-2 Master Control Board(MST) (cont’d) MST has 2 euro connector for power supply and control inputs and outputs. Trx to MST connection is through 140 pin connectors. Chapter 5...

  • Page 111: Power Supply(Lv/Hvps)

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-4 Power Supply(LV/HVPS) An integrated power supply (Low voltage & High voltage) is required to supply all required voltages to Backend and Front End hardware of LOGIQ Uno. Following are the voltage requirements for the Uno...

  • Page 112: Rear Panel Assembly

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-5 Rear Panel Assembly This board/boards shall be an interface module, which can be plugged into the system back plane via 96-pin EURO connector. There are two boards in this assembly rear panel board1 and rear panel board 2. There is a 34-pin connector on each of the boards for interface between the two boards.

  • Page 113: Keyboard Assembly

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-6 Keyboard Assembly 5-2-6-1 Main PCB This board will be mounted on to the rear of keyboard. This will be a 4 LAYER FAB. (Complete Electronics) This houses the controller, CPLD/FPGA & other logic circuits. The key code data & TGC ADC value is sent to MST using asynchronous serial interface.

  • Page 114: Lcd

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-7 Monitor of LCD type and the LCD Panel shall meet the following requirements. 1.) Size: 12.1 inch (Standard size) 2.) Resolution: 800x600 3.) Color: 256K color (RGB, 6 Bits each) LCD has a mounting arrangement to fix on top of the Uno console and should have provision to adjust the position both vertically and Horizontally.

  • Page 115: Brightness Adjustment

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-2-7LCD (cont’d) There is an indication of the status of the LCD monitor using LED. Table 7: Condition LED status 1. Power Off LED off 2. Power on without LVDS signal Glow Orange color 3.
  • Page 116 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 5-4ON/OFF Signal Flow Below is the flow chart that explains the signal flow during the system ON/OFF. Chapter 5 5-13 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 116 of 252...

  • Page 117: On/Off Signal Flow

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5-14 Section 5-4 - ON/OFF Signal Flow Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 117 of 252...

  • Page 118: Overview

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 6Service Adjustments Section 6-1Overview 6-1-1 Purpose This chapter describes how to test and adjust the mechanical capabilities of a scanner that may be out of specification. Although some tests may be optional they should only be performed by qualified personnel.
  • Page 119 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 6-3Monitor Adjustment This helps to adjust the settings of the Contrast and the Brightness on the LCD Monitor suitably. The Monitor Adjustment button is displayed as shown.
  • Page 120 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 7Diagnostics/Troubleshooting Section 7-1Overview 7-1-1 Purpose This chapter describes how to test and adjust the electrical and voltage capabilities of a scanner that may be out of specification. Although some tests may be optional they should only be performed by qualified personnel.

  • Page 121: Led Descriptions

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-2LED Descriptions 7-2-1 TxRx Board The TX Board is located at the No. 1 slot in the Card Cage Assembly. DESCRIPTION STATE Indicates Trig indicates on board generated voltage ON-OK +1.8V...

  • Page 122: Mst Board

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-2-2 MST Board The TX Board is located at the No.2 slot in the Card Cage Assembly. DESCRIPTION STATE LED3 indicates on board generated voltage ON-OK +1.5V LED7...

  • Page 123: Backplane Board

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-2-3 BackPlane Board DESCRIPTION STATE LED1 indicates on board generated voltage +5V ON-OK LED2 indicates on board generated voltage ON-OK +12VA LED3 indicates on board generated voltage ON-OK +3.3VD...

  • Page 124: Connector Board

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-2-4 Connector Board DESCRIPTION STATE R_BANK_SELECT 0 R_BANK_SELECT 1 Will be “ON” while Configuring FPGA, and Turned “OFF” during Functionality ON-FPGA Not Configured Trig LED Figure 7-3 Connector Board...

  • Page 125: Rear Panel Boardservice Diagnostics

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-2-5 Rear Panel BoardService Diagnostics DESCRIPTION STATE Interlock ON-OK ON-OK ONOK ON-OK TxRx ON-OK ON-OK Figure 7-4 Rear Panel Section 7-2 - LED Descriptions Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 125 of 252...

  • Page 126: Voltage Testing

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-3Voltage Testing 7-3-1 MST Board The following Low Voltage Testing points available on MST Board: 1.) +12 Volts 2.) +5 Volts 3.) -5 Volts 4.) +3.3 Volts...

  • Page 127: Troubleshooting Tips

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-4Troubleshooting Tips Issue S.NO Possible Cause Resolution System doesn’t Bootup Circuit Breaker Trip Switch On Circuit Breaker Transformer Failure Replace Transformer HvLv Failure Replace HvLv MST Failure...

  • Page 128: Troubleshooting Guide

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-5Troubleshooting Guide 7-5-1 Probe not getting recognized Chapter 7 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 128 of 252...

  • Page 129: No Ultrasound Image

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-2 No Ultrasound Image No Ultrasound Image Switch ON the system. Confirm the system boots up to the echoloader Image screen Check and Confirm the probe is recognized. Check and confirm the probe is not defective.

  • Page 130: No Display

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-3 No Display Chapter 7 7-11 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 130 of 252...

  • Page 131: System Does Not Boot

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-4 System does not Boot 7-12 Section 7-5 - Troubleshooting Guide Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 131 of 252...

  • Page 132: System Does Not Switch On

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-5 System does not switch ON Chapter 7 7-13 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 132 of 252...

  • Page 133: Unable To Print On The Printers (Upd897/Deskjet)

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-6 Unable to Print on the Printers (UPD897/Deskjet) 7-14 Section 7-5 - Troubleshooting Guide Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 133 of 252...

  • Page 134: No Keyboard Response

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-7 No Keyboard response Chapter 7 7-15 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 134 of 252...

  • Page 135: No Image On External Monitor

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-8 No Image on External Monitor 7-16 Section 7-5 - Troubleshooting Guide Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 135 of 252...

  • Page 136: Peripheral Power On Top Panel Absent

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-9 Peripheral Power on Top Panel absent Peripheral Power on Top Panel absent Connect mains cable and Switch ON the system. Ensure Circuit breaker is switched ON Check if the fuses for...

  • Page 137: Unable To Archive And Backup

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-10 Unable to Archive and Backup 7-18 Section 7-5 - Troubleshooting Guide Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 137 of 252...

  • Page 138: Tgc Malfunction

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-11 TGC malfunction Chapter 7 7-19 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 138 of 252...

  • Page 139: Gain Malfunction

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-12 Gain malfunction 7-20 Section 7-5 - Troubleshooting Guide Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 139 of 252...

  • Page 140: Trackball Malfunction

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7-5-13 Trackball malfunction Trackball malfunction Enter 'Service Diagnostics' from 'Utility' screen. Enter login id and password. Run Keyboard Tests Check all Keyboard Tests including Trackball tests Is A/N and...
  • Page 141 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6Service Diagnostics Servics Diagnostics can be accessed from the utility screen. 1. Press the Utility button on the Keyboard Panel. Figure 7-6 Utility button on keyboard 2. Following Screen will appear. Refer Figure 7-2 below.

  • Page 142: Service Diagnostics

    GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) Figure 7-8 Service diagnostics Login Screen 4. Enter User Name: Service Password: Sample (Confidential) and press OK. 5. Once you type the User name and password, service diagnostics main screen (Refer Figure 7-4) will appear.
  • Page 143 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) Figure 7-9 Service Diagnostics Main Screen a - Indicators 1.) FULL Tests: To perform the MST, TRX, and CON board, Click FULL Test button (Refer figure 7-5) on Service Diagnostics main screen.The test will be performed and result will be displayed...
  • Page 144 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) 2.) Keyboard Test: From the service diagnostics main screen click on Keyboard Test (Refer Figure 7-6) and the screen (Refer Figure 7-7) will appear.
  • Page 145 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) 3.) LCD Test: From the service diagnostics main screen click on LCD Test (Refer Figure 7-8) and the screen (Refer Figure 7-9) will appear.
  • Page 146 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) 4.) Event Logs: Click Event Logs Button from the Service Diagnostics main Screen ( Refer Figure 7-10). Figure 7-15 Event Logs a - click here to invoke Event Logs screen Following screen will appear (Refer Figure 7-11).
  • Page 147 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) 5.) Error Log: Press "Error Log" Button from the Service Diagnostics main Screen (Refer figure 7-12). Figure 7-17 Error Log a - Click here to invoke Error Logs Error Log Screen Consists of Error Name, Error Description Error Date and Time columns.
  • Page 148 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 7-6 Service Diagnostics (cont’d) 6.) Copy To CD: Put CD onto CD driver. Click the Copy to CD button (Refer Figure 7-14) from Service Diagnostics main Screen. Log files will be copied to CD.
  • Page 149 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL This page was intentionally left blank. 7-30 Section 7-6 - Service Diagnostics Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 149 of 252...
  • Page 150 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 8Replacement Procedures Section 8-1Overview 8-1-1 Purpose This chapter describes replacement procedures for the following modules and subsystems. 8-1-2 Returning/Shipping Probes and Repair Parts Equipment being returned must be clean and free of blood and other infectious substances.
  • Page 151 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-2 LCD 8-2-1 LCD ASSEMBLY(FRU P/N # 5271538) This is a description on how to remove and replace the LCD Assembly. Tools 8-2-1-1 • Common phillips screwdrivers...
  • Page 152 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-2-1 LCD ASSEMBLY(FRU P/N # 5271538) (cont’d) 5.) Unscrew the two screws (A, B) in Figure 8-3 on page 8-3 6.) Lift the LCD Assembly upward to remove it from the system.
  • Page 153 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-2-2 LCD Arm Cover Set (FRU P/N # 5270335) Tools 8-2-2-1 • Common phillips screwdrivers 8-2-2-2 Needed Manpower • 1 person, 15 minutes + travel 8-2-2-3 Preparations •...
  • Page 154 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Keyboard Rear Cover Figure 8-5 Keyboard Rear Cover 8-2-2-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-2-2. Equipment passes all...
  • Page 155 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-2-3 Handle A3 Console (FRU P/N # 5168365) Tools 8-2-3-1 • Common phillips screwdrivers; Allen Key Set. 8-2-3-2 Needed Manpower • 1 person, 15 minutes + travel 8-2-3-3 Preparations •...
  • Page 156 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-2-4 Monitor Holder Assembly(FRU P/N # 5308054) Tools 8-2-4-1 • Common phillips screwdrivers; Allen Key Set; Standard Screwdriver. 8-2-4-2 Needed Manpower • 1 person, 30 minutes + travel...
  • Page 157 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-2-4-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-2-4. Equipment passes all required tests and is ready for use.
  • Page 158 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-3 Keyboard 8-3-1 Keyboard Assembly (FRU P/N # 5168531) 8-3-1-1 Tools • Common phillips screwdrivers 8-3-1-2 Needed Manpower • 1person, 10 minutes + travel Note: The Freeze key is part of Keyboard.
  • Page 159 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 2.) Unscrew the four screws (a, b, c, and d). Figure 8-8 Key Board Bottom View 3.) Lift the Keyboard Assembly Up and Remove the Keyboard cable Keyboard cable Figure 8-9 Keyboard cable location 4.) Remove Keyboard Assembly.
  • Page 160 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-1-6 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-3-1. Equipment passes all required tests and is ready for use.
  • Page 161 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-2 TGC PWA FRU Assy (FRU P/N # 5266629) Tools 8-3-2-1 • Common phillips screwdrivers 8-3-2-2 Needed Manpower • 1 person, 10 minutes + travel 8-3-2-3 Preparations •...
  • Page 162 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-2-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-3-2. Equipment passes all required tests and is ready for use.
  • Page 163 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-3 Alpha Numeric Keyboard with cables (FRU P/N # 5181790) Tools 8-3-3-1 • Common phillips screwdrivers 8-3-3-2 Needed Manpower • 1 person, 30 minutes + travel 8-3-3-3 Preparations •...
  • Page 164 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-4 Optical Trackball Assy (FRU P/N # 5262338) Tools 8-3-4-1 • Common phillips screwdrivers 8-3-4-2 Needed Manpower • 1 person, 10 minutes + travel 8-3-4-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 165 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-5 Encoder Set (FRU P/N # 5262796) Tools 8-3-5-1 • Common phillips screwdrivers; Plier 8-3-5-2 Needed Manpower • 1 person, 30 minutes + travel 8-3-5-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 166 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL A/N Keyboard Figure 8-13 Encoder Set 8-3-5-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-2-5. Equipment passes all...
  • Page 167 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-6 CA3-Keyboard Interface Cable (FRU P/N # 5192650) Tools 8-3-6-1 • Common phillips screwdrivers 8-3-6-2 Needed Manpower • 1 person, 30 minutes + travel 8-3-6-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 168 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Keyboard Interface Cable Figure 8-14 Keyboard Interface cable Chapter 8 8-19 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 168 of 252...
  • Page 169 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Figure 8-15 Cable routing 8-20 Section 8-3 - Keyboard Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 169 of 252...
  • Page 170 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Figure 8-16 Cable connected to keyboard 8-3-6-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-3-6. Equipment passes all...
  • Page 171 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-7 Keyboard Cover Set (FRU P/N # 5262766) Tools 8-3-7-1 • Common phillips screwdrivers 8-3-7-2 Needed Manpower • 1 person, 15 minutes + travel 8-3-7-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 172 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Keyboard Rear Cover Figure 8-18 Keyboard Rear Cover 8-3-7-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-3-7. Equipment passes all...
  • Page 173 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-8 Keyboard Knob Set (FRU P/N # 5263937) Tools 8-3-8-1 • Common phillips screwdrivers 8-3-8-2 Needed Manpower • 1 person, 15 minutes + travel 8-3-8-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 174 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-3-8-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-3-8. Equipment passes all required tests and is ready for use.
  • Page 175 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-4 Mechanicals 8-4-1 RH Side Cover (FRU No. 5265162) This is a description on how to remove and replace the Right Cover. 8-4-1-1 Tools • Common Phillips screwdrivers...
  • Page 176 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-2 LH Side Cover (FRU No. 5267220) This is a description on how to remove and replace the Left Cover. 8-4-2-1 Tools • Common Phillips screwdrivers 8-4-2-2 Needed Manpower •...
  • Page 177 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-3 Rear Cover (FRU No. 5269718) Purpose: This is a description on how to remove and replace the Rear Cover. 8-4-3-1 Tools • Common Phillips screwdrivers 8-4-3-2 Needed Manpower •...
  • Page 178 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-4 Front Cover (FRU No. 5271834) This is a description on how to remove and replace the Front Cover. 8-4-4-1 Tools • Common Phillips screwdrivers 8-4-4-2 Needed Manpower •...
  • Page 179 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-5 Top Cover (FRU P/N # 5168637) Tools 8-4-5-1 • Common phillips screwdrivers 8-4-5-2 Needed Manpower • 1person, 15 minutes + travel 8-4-5-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 180 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-6 Rear Arm Cover Set (FRU P/N # 5263051) Tools 8-4-6-1 • Common phillips screwdrivers 8-4-6-2 Needed Manpower • 1person, 15 minutes + travel 8-4-6-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 181 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-7 LH Arm Cover Front with GE Logo (FRU P/N # 5263193) / RH Arm cover Front with Labels (FRU # 5263420) Tools 8-4-7-1 • Common phillips screwdrivers 8-4-7-2 Needed Manpower •...
  • Page 182 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL LH Cover with GE logo Figure 8-26 LH Cover with GE Logo Chapter 8 8-33 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 182 of 252...
  • Page 183 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL RH Arm Cover with GE Logo Figure 8-27 RH Arm Cover 8-4-7-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-4-7. Equipment passes all...
  • Page 184 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-8 Front Bumper (FRU No. 5168362) This is a description on how to remove and replace the Front Bumper. 8-4-8-1 Tools • Common Phillips screwdrivers 8-4-8-2 Needed Manpower •...
  • Page 185 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-9 Castor Wheel Front (FRU P/N # 5265433) / Castor Wheel Rear (FRU P/N # 5264222) Tools 8-4-9-1 • Common phillips screwdrivers; Allen Key Set. 8-4-9-2 Needed Manpower •...
  • Page 186 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Figure 8-29 Castor wheel 8-4-9-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-4-9. Equipment passes all required tests and is ready for use.
  • Page 187 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-10 Right EMI Cover (Part of EMI Cover Assy FRU P/N # 5264421) This is a description on how to remove and replace the Right EMI Cover (P/N # 5196549).
  • Page 188 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-11 Left EMI Cover(Part of EMI Cover Assy FRU P/N # 5264421) This is a description on how to remove and replace the Left EMI Cover.(P/N # 5196545)
  • Page 189 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-12 Card Cage EMI Cover (Part of EMI Cover Assy FRU P/N # 5264421) This is a description on how to remove and replace the Card Cage EMI Cover (P/N # 5233532)
  • Page 190 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-13 Conn-EMI-Cover-Assy (Part of EMI Cover Assy FRU P/N # 5264421) This is a description on how to remove and replace the Front EMI Cover (P/N # 5196548)
  • Page 191 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-4-14 Fan Assy (FRU No. 5215345) This is a description on how to remove and replace the Card Cage Fan Assy. 8-4-14-1 Tools • Common Phillips screwdrivers 8-4-14-2 Needed Manpower •...
  • Page 192 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5.) Loose the two screws (a,b) Figure 8-36 Removing Fan Assembly 6.) Pull out the Fan Assy 8-4-14-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test...
  • Page 193 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-5 I/O Interfaces 8-5-1 Rear Panel Assy (FRU No. 5196446) This is a description on how to remove and replace the Rear Panel Assy. 8-5-1-1 Tools •...
  • Page 194 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-5-1-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-4-14. Equipment passes all required tests and is ready for use.
  • Page 195 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-5-1-6 Front Panel (FRU P/N # 5192657 for 100-110V / P/N # 5196449 for 220-240V ) This is a description on how to remove and replace the Front Panel.
  • Page 196 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 2.) Disconnect USB’s and Power connector Figure 8-39 Removing Front Panel USB Power cord 3.) Remove the Front Panel 8-5-1-11 Functional Checkout Procedure Functional and/or Leakage Current See Section...
  • Page 197 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-5-2 CA9-Transformer to Front Panel and power supply cable assy (FRU P/N # 5192656) Tools 8-5-2-1 • Common phillips screwdrivers 8-5-2-2 Needed Manpower • 1person, 30 minutes + travel...
  • Page 198 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Remove this connector from Transformer assm. Figure 8-40 J4 TRX Chapter 8 8-49 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 198 of 252...
  • Page 199 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Remove Cables from these clamps Figure 8-41 Cable routing Figure 8-42 SSR 8-50 Section 8-5 - I/O Interfaces Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 199 of 252...
  • Page 200 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Remove this connector Figure 8-43 Connector Chapter 8 8-51 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 200 of 252...
  • Page 201 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Remove these USB terminals Figure 8-44 USB terminals Figure 8-45 Grounding Cables 8-52 Section 8-5 - I/O Interfaces Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 201 of 252...
  • Page 202 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Figure 8-46 Grounding Cable 8-5-2-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script Service Manual Direction 5213326-100, Rev 3, Section 8-5-3. Equipment passes all...
  • Page 203 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-5-3 CA4-USB Cable Assy (FRU P/N # 5192651) Tools 8-5-3-1 • Common phillips screwdrivers 8-5-3-2 Needed Manpower • 1person, 30 minutes + travel 8-5-3-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 204 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 6. Remove the cables from cable ties in the Right Arm and remove the USB cable assy Backplane Remove the Fan USB cables at these connections on the BPB...
  • Page 205 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Cable Routing Figure 8-48 Cable Routing 8-56 Section 8-5 - I/O Interfaces Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 205 of 252...
  • Page 206 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-5-3-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-5-4. Equipment passes all required tests and is ready for use.
  • Page 207 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-6 PCB 8-6-1 PCB Boards This is a description on how to remove and replace the PCB Boards. 8-6-1-1 Tools • Common Phillips screwdrivers 8-6-1-2 Needed Manpower •...
  • Page 208 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 7.) Pull out the board in the direction indicated by the arrow (2) in Figure B, do not bend itr. Figure B SLOT BOARD FRU NO. TxRx 5184762...
  • Page 209 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-6-2 Connector Board Assy (FRU No. 5193606) This is a description on how to remove and replace the Conn. Board Assy. 8-6-2-1 Tools • Common Phillips screwdrivers 8-6-2-2 Needed Manpower •...
  • Page 210 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-6-2-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Service Manual Direction 5213326-100, Rev 3, Section 8-6-2. Equipment passes all required tests and is ready for use.
  • Page 211 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-6-3 Back Plane Board (FRU No. 5183676) This is a description on how to remove and replace the Back Plane Board. 8-6-3-1 Tools • Common Phillips screwdrivers 8-6-3-2 Needed Manpower •...
  • Page 212 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 6.) Unscrew the fourteen screws (1-14) as marked in Figure 4-50 Figure 8-52 Removing BPB Assembly 7.) Remove the Backplane 8-6-3-5 Functional Checkout Procedure Functional and/or Leakage Current...
  • Page 213 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 8-7 Power Block 8-7-1 Transformer Assembly (FRU No. 5196448) This is a description on how to remove and replace the Transformer Assy. 8-7-1-1 Tools • Common Phillips screwdrivers...
  • Page 214 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 5.) Remove the Transformer Assembly from the guide 8-7-1-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Leakage Current mea- Service Manual Direction 5213326-100, Rev 3, Section 8-7-1.
  • Page 215 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 8-7-2 Power Entry Module Tools 8-7-2-1 • Common phillips screwdrivers 8-7-2-2 Needed Manpower • 1person, 15 minutes + travel 8-7-2-3 Preparations • Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
  • Page 216 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Remove these screws Figure 8-55 Circuit Breaker 8-7-2-5 Functional Checkout Procedure Functional and/or Leakage Current See Section Test Debrief Script 4-3-1 Power On/Boot Up Leakage Current mea- Service Manual Direction 5213326-100, Rev 3, Section 8-7-2.
  • Page 217 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL This page was intentionally left blank. 8-68 Section 8-7 - Power Block Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 217 of 252...
  • Page 218 IRECTION EVISION ERVICE ANUAL Chapter 9Renewal Parts Section 9-1Overview 9-1-1 Purpose This chapter gives you an overview of Spare Parts available for the LOGIQ A3 9-1-2 Table Of Contents Table 9-1 Contents in Chapter 9 S.No Description Page Number Overview...
  • Page 219 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 9-3Operator Console Assy Figure 9-1 Operator Console Assembly Section 9-3 - Operator Console Assy Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 219 of 252...
  • Page 220 LVHV Integrated Power supply for Logiq UNO Console 5183676 BPB-PWA-Uno-Console 5184762 TRX-PWA-UNO-Console 5193606 2 Port Connector Board Logiq Uno 5268149 MST PWA Assembly for Logiq A3 5264760 Digital Interface Board Asm for Logiq A3 5196446 Rear_Panel_Assembly_Complete_UNO 5196447 Top_Panel_Assembly-Complete_UNO 5196448 Transformer_Assembly-Complete_UNO 5231741 Power_Entry_Module_Assy 2326158...
  • Page 221 Part Description Number 5168500 Probe-Holder-Uno-Console 5263051 Rear Arm cover set with retainable fasteners 5263193 LH Arm cover _Front with GE logo 5263420 RH Arm cover front with Labels 5270335 LCD Arm Cover Set 5264421 EMI Cover Asm for Logiq A3...
  • Page 222 LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Part Part Description Number 5269387 USB Foot Switch Logiq A3 2365879 POWER CABLE JAPAN (LOGIQ 3) 2365880 POWER CABLE US (LOGIQ 3) 2365881 POWER CABLE EUROPE (LOGIQ 3) 2365882 POWER CABLE INDIA (LOGIQ 3)
  • Page 223 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 9-3 - Operator Console Assy Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 223 of 252...
  • Page 224 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Chapter 10Care & Maintenance Section 10-1Overview 10-1-1 Periodic Maintenance Inspection It has been determined by engineering that your LOGIQ™ A3 system does not have any high wear components that fail with use, therefore no Periodic Maintenance Inspections are mandatory. Some Customers Quality Assurance Programs may require additional tasks and or inspections at a different frequency than listed in this manual.
  • Page 225 Testing results, corrective action and the effects of corrective action must be documented and maintained on the site. Your GE service representative can help you with establishing, performing and maintaining records for a quality assurance program. Please contact us for coverage information and/or price for service.
  • Page 226 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Table 10-2 Customer Care Schedule Service at Indicated Time Daily Weekly Monthly Annually Notes •* Clean Probes * or before each use • Clean Probe Holders more frequently depending on •...
  • Page 227 ANUAL Section 10-4Tools Required 10-4-1 Standard GE Tool Kit The following is a description of the “Standard” GE tool kit in the USA. Not all tools are required for PMs. Table 10-3 Overview of GE-1 Tool Kit Contents Tool ID...
  • Page 228 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Table 10-3 Overview of GE-1 Tool Kit Contents (Continued) Tool ID Description Tool ID Description 9-46696 Hex Keys 9-XL100X Wire Stripper/Cutter 5 inch - 100X 9-39829 Torpedo Level, Magnetic...
  • Page 229 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-4-2 Special Tools, Supplies and Equipment 10-4-2-1 Specific Requirements for Care & Maintenance Table 10-5 Overview of Requirements for Periodic Maintenance Tool Part Number Comments Digital Volt Meter (DVM)
  • Page 230 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 10-5System Maintenance 10-5-1 Preliminary Checks The preliminary checks take about 15 minutes to perform. Refer to the system user documentation whenever necessary. Table 10-6 System Checks Step...
  • Page 231 Peripheral/Option Checks If any peripherals or options are not part of the system configuration, the check can be omitted. Refer to the User Manual for a list of approved peripherals/options. Table 10-8 GE Approved Peripheral/Hardware Option Functional Checks Step Item Description B/W Printer Verify hardcopy output of the B/W video page printer.
  • Page 232 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-5-4 Cleaning 10-5-4-1 General Cleaning Table 10-10 General Cleaning Step Item Description Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire system. Be careful Console not to get the cloth too wet so that moisture does not enter the console.
  • Page 233 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-5-4-3 Physical Inspection Table 10-12 Physical Checks Step Item Description Labeling Verify that all system labeling is present and in readable condition. Scratches & Dents Inspect the console for dents, scratches or cracks.
  • Page 234 The system user manuals and various probe handling cards provide a complete description of probe care, maintenance, cleaning and disinfection. Ensure that you are completely familiar with the proper care of GE probes. Ultrasound probes can be easily damaged by improper handling. See the User Manual and probe care cards for more details.
  • Page 235 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 10-6Electrical Safety Tests 10-6-1 Safety Test Overview The electrical safety tests in this section are based on and conform to NFPA 99 (For USA) and IEC/EN 60601-1 Medical Equipment Safety Standards. They are intended for the electrical safety evaluation of cord-connected, electrically operated, patient care equipment.
  • Page 236 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-2 GEMS Leakage Current Limits The following limits are summarized for NFPA 99 (For USA) and IEC 60601-1 Medical Equipment Safety Standards. These limits are GEMS standards and in some cases are lower than the above standards listed.
  • Page 237 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-3 Outlet Test - Wiring Arrangement - USA & Canada Test all outlets in the area for proper grounding and wiring arrangement by plugging in the neon outlet tester and noting the combination of lights that are illuminated.
  • Page 238 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-4 Grounding Continuity Electric Shock Hazard. The patient must not be contacted to the equipment during this test CAUTION Measure the resistance from the third pin of the attachment plug to the exposed metal parts of the case.
  • Page 239 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-4-2 Dale 600 - Ground Continuity The Dale 600 measures line cord resistance from the third pin of the attachment plug to the meter’s Chassis Cable clamp. Test the grounding continuity of the system to all exposed metal parts in accordance with the IEC 601-1.1 procedure as above.
  • Page 240 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-5 Chassis Leakage Current Test 10-6-5-1 Definition This test measures the current that would flow in a grounded person who touched accessible metal parts of the bedside station if the ground wire should break. The test verifies the isolation of the power line from the chassis.
  • Page 241 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-5-3 Dale 600 Meter Procedure When measuring system chassis currents with the Dale 600, always use the CHASSIS selection of the external/chassis function switch. This requires the ground clip lead and changing the meters switches in accordance with the IEC 601-1.1.
  • Page 242 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-5-4 Data Sheet for Chassis Source Leakage Current The test passes when all readings measure less than the value shown in Table 10-14. Record all data on the PM Inspection Certificate.
  • Page 243 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-6 Probe Leakage Current Test 10-6-6-1 Definition This test measures the current that would flow to ground from any of the probes through a patient who is being scanned and becomes grounded by touching some other grounded surface.
  • Page 244 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-6-3 Meter Procedure Using Probe Adapter (cont’d) Figure 10-8 Transducer Source Leakage Current Test 6.) Set the meter's “FUNCTION” switch to EXTERNAL position. 7.) Add the saline probe and the imaging area of the probe into the saline bath.
  • Page 245 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-6-4 No Meter Probe Adapter Procedure Figure 10-9 Follow these steps to test each transducer for leakage current. 1.) Turn the LOGIQ™ A3 unit OFF. 2.) Plug the unit into the test meter, and the meter into the tested AC wall outlet.
  • Page 246 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL 10-6-6-5 Data Sheet for Transducer Source Leakage Current The test passes when all readings measure less than the values shown in Table 10-15 Table 10- 16. Record all data on the PM Inspection Certificate.
  • Page 247 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Section 10-7When There's Too Much Leakage Current... CHASSIS FAILS Check the ground on the power cord and plug for continuity. Ensure the ground is not broken, frayed, or intermittent. Replace any defective part.
  • Page 248 Air Filter M-Mode Function Probe Holders External I/O Wheels, Brakes & Swivel Locks Control Panel Cables and Connectors Monitor GE Approved Peripherals (VCR, CD-RW, Printers) Measurement Accuracy GE Approved Peripherals COMMENTS: ______________________________________________________________________________ ______________________________________________________________________________ Chapter 10 10-25 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 248 of 252...
  • Page 249 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL ELECTRICAL SAFETY Max Value Value Electrical Test Performed Allowed Measured Comments Outlet (correct ground &wiring config.) System Ground Continuity Chassis Source Leakage Current - Probe Chassis Source Leakage Current - Wheel...
  • Page 250 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Index Basic Measurements Power Off 16 Functional Checks 9 Power On 14 Boot Up 14 Power-up Procedures Voltage Settings 11 Cine Prepearing the Unit for Installation 11 Functional Checks 11...
  • Page 251 GE H EALTHCARE 5213326-100, R LOGIQ™ A3 S IRECTION EVISION ERVICE ANUAL Index - 2 Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 251 of 252...
  • Page 252 GE Healthcare: Telex 3797371 P.O. Box 414; Milwaukee, Wisconsin 53201, U.S.A. (Asia, Pacific, Latin America, North America) GE Ultraschall:Tel: +49 (0) 212 28 02 208 Deutschland GmbH & Co KG Beethovenstrabe 239, Postfach 11 05 60 D-42655 Solingen, Germany Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 252 of 252...

Table of Contents