Adjusting The Brightness Of The Printer Window Display - Sony UP-51MDP Instructions For Use Manual

Setting Up the Printer (Continued)
Adjusting the Brightness of the Printer Window
Display
110
Installation and Adjustment
When it is hard to read the contents of the printer window display, adjust the
brightness using the menu.
1
Press the MENU button, then select PRN by pressing the G or g button.
The PRINTER SETUP menu appears on the source image.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Switch PRN to green by pressing
the G or g button.
2
Select SYSTEM by pressing the F or f button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Position the cursor at SYSTEM
by pressing the F or f button.
2,4,6
1,7
3,6
1,5
P R I NT ER S E T UP
/ c / l / PRN / i / o /
Display PRN in capital letters
S
by pressing the G or g button.
S Y S T EM
Press the F or f button until
S
SYSTEM appears.
:
PRE SS [ > ]