®
Gilbarco
Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco termi-
nal. This bar code sets the baud rate to 2400 bps and the data format to 7 data bits,
even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the
following prefixes for each symbology:
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan bioptic scanner auxiliary port configuration. This bar code sets the baud
rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Voyager 1470/1472 User Guide
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
Honeywell Bioptic Settings
©
Bioptic Aux Port Configuration
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
17