QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
Data Matrix
Data Matrix On/Off
154
on page 220), and scan the value and the Save bar code
Programming
Chart. The data characters should then appear properly.
< Default All Data Matrix Settings >
* On
QR Code Page
Voyager 1470/1472 User Guide
Off
ISO 2022/ISO 646
Off