Honeywell Voyager XP 1470g Series User Manual page 119

F2 Example: Send a number of characters
Send the first 10 characters from the bar code above, followed by a carriage return.
Command string: F2100D
F2 is the "Send a number of characters" command
10 is the number of characters to send
0D is the hex value for a CR
The data is output as: 1234567890
F2 and F1 Example: Split characters into 2 lines
Send the first 10 characters from the bar code above, followed by a carriage return,
followed by the rest of the characters.
Command string: F2100DF10D
F2 is the "Send a number of characters" command
10 is the number of characters to send for the first line
0D is the hex value for a CR
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
1234567890
ABCDEFGHIJ
<CR>
Send all characters up to a particular character
F3 Include in the output message all characters from the input message, starting with
the character at the current cursor position and continuing to, but not including, the
search character "ss," followed by an insert character. The cursor is moved forward
to the "ss" character. Syntax = F3ssxx where ss stands for the search character's hex
value for its ASCII code, and xx stands for the insert character's hex value for its
ASCII code.
Refer to the
character codes.
F3 Example: Send all characters up to a particular character
Voyager 1470/1472 User Guide
ASCII Conversion Chart (Code Page 1252) for decimal, hex and
103