Qr Code Page; Data Matrix; Data Matrix On/Off - Honeywell Vuquest 3320g User Manual

QR Code Page

QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
on page 211), and scan the value and the Save barcode from the
Chart,

Data Matrix

Data Matrix On/Off

* On
Vuquest 3320g User Guide
beginning on page 222. The data characters should then appear properly.
< Default All Data Matrix Settings >
QR Code Page
Off
Symbology Charts
Programming
Off
135