Specifications - Honeywell VE4000 Series Instruction Sheet

TECHNICAL

SPECIFICATIONS

VE series solenoid gas valves
VExx10 (DN 10)
VExx15 (DN 15)
VExx20 (DN 20)
VExx25 (DN 25)
VExx32 (DN 32)
VExx40 (DN 40)
VExx50 (DN 50)
VExx65 (DN 65)
VExx80 (DN 80)
VEx100 (DN 100)
VE series suitable for fluid power actuators
VE5065 (DN 65)
VE5080 (DN 80)
VE5100 (DN 100)
Pipe sizes 1000/2000 series
Inlet and outlet G3/8" up to G21/2" internal parallel pipe
thread according ISO 7-1
Pipe sizes 3000/4000 series
Flanged connection DN 65, DN 80 and DN100 according to
DN 16 UNI 2223.
Torsion and bending stress
Pipe connections meet Group 2 according EN 161
requirements.
Ambient temperature
-15 °C ... 60 °C
Supply voltage
24 V, 50/60 Hz 1)*
100-120 V, 50/60 Hz
200-240 V, 50/60 Hz
The applicable voltage is led to the solenoid coil via a
rectified circuit.
1): only for DN10 up to DN50
Operational voltage range
The gas valve will function between 85% and 110% of the
rated voltage
Electrical connection VE4xxx/VE6xxx/VE8xxx
Option 1: Wiring on terminal block on circuit cables entering
box via PG Cable Gland
Option 2: Connection by means of DIN plug on DIN faced
connection located on front cover according to
ISO4400 / DIN EN 175301-803
Electrical connection VE5xxx series
See product literature fluid power actuators
Enclosure VE4xxx/VE6xxx/ VE8xxx
IP 65 when using supplied PG gland and cable
diameter 7 – 13 mm for PG version or using suitable DIN
plug with gasket.
Capacity
See page 7 and 8
Maximum operating pressure
Inlet
VE4010/VE6010
VE8010
VE4015/VE6015
VE8015
VE4020/VE6020
VE8020
VE4025/VE6025
VE8025
VE4032/VE6032
VE8032
VE4040/VE6040
VE8040
VE4050/VE6050
VE8050
VE4065/VE6065
VE8065
VE5065
VE4080/VE6080
VE8080
VE5080
VE4100/VE6100
VE5100
3
Honeywell
Maximum operating pressure (mbar)
200 or 500
200
200 or 500
200
200 or 500
200
200 or 500
200
200 or 500
200
200 or 500
200
200 or 500
200
200 or 500
200
200 or 360
200 or 500
200
200 or 360
200 or 500
200 or 500
ISTR0018 1602RA-NE