GE LOGIQ 7 Basic User Manual page 197

Hide thumbs Also See for LOGIQ 7:

Table of Contents

To enable the

LOGIQ 7 Online Help

Direction 2392536-100 Rev. 1

To re-enable all deleted frames :

1. Position the cursor on the Frame Marker line and press the

left Set key. The system menu is diplayed at the cursor

2. Select Enable all frames.

3. All disabled frames are re-enabled.

Figure 5-29. Frame makers

1. Analysis Window

2. Frame markers axis

3. Enabled frame (Green)

4. Disabled frame (Red)

6. Current frame

Optimizing B-Mode