Table of Contents
Advertisement
Hardware Preparation and Installation
A default baud rate of 9600 is used for serial ports on CPCI-6020 boards. After power-up, the
baud rate can be changed using the PPCBug PF (Port Format) command via the command line
interface. Whatever the baud rate, some type of hardware handshaking; either XON/OFF or via
the RTS/CTS line is desirable if the system supports it.
56
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
System Considerations
Advertisement
Table of Contents
