Maintenance And Support Cleaning; Maintaining Components; Storage; Support - RIDGID SeeSnake Compact M40 Operator's Manual

With truesense technology
Hide thumbs Also See for SeeSnake Compact M40:
Table of Contents

Advertisement

Maintenance and Support
Cleaning
Clean your system with rags and a soft nylon brush. If
desired, a mild detergent or disinfectant can be used. Do
not use solvents or high pressure water to clean any part
of the system.

Maintaining Components

Camera Head
Scratches on the camera have a minimal effect on its
performance. Do not use scraping tools or sand the cam-
era to remove scratches.
Push Cable
Run a rag over the push cable and visually inspect it for
cuts and abrasions while pushing it back into the drum.
Replace or repair the push cable if the outer jacket is cut
or abraded.

Storage

The Compact M40 must be stored in a dry, secure area
between -10°C and 70°C [14°F and 158°F]. Store your
equipment in a locked area out of the reach of children
and people unfamiliar with its purpose.
12 – English – Compact M40

Support

For support and additional information about using your
system, visit support.seesnake.com/compact-m40/.

Service and Repair

Improper service or repair can cause the camera reel
to be unsafe to operate.
Service and repair of the camera reel must be performed
at a RIDGID Independent Authorized Service Center. To
find your nearest service center or for any service or re-
pair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com.
• Contact Ridge Tool Company Technical Service
Department at rtctechservices@emerson.com or, in
the USA and Canada, call 1-800-519-3456.

Disposal

Parts of your system contain valuable materials that can
be recycled. There are companies that specialize in re-
cycling that may be found locally. Dispose of the com-
ponents in compliance with all applicable regulations.
Contact your local waste management authority for more
information.
EC Countries: Do not dispose of electrical
equipment with household waste!
According to the European Guideline 2012/19/
EU for Waste Electrical and Electronic
Equipment and its implementation into na-
tional legislation, electrical equipment that is
no longer usable must be collected separate-
ly and disposed of in an environmentally cor-
rect manner.
Battery Disposal
EC Countries: Defective or used batteries must be recy-
cled according to the guideline 2006/66/EEC.

Advertisement

Table of Contents
loading

Table of Contents