Cs6X Versa Docking System; Mounting The Monitor; Removing The Monitor - RIDGID SeeSnake Compact M40 Operator's Manual

CS6x Versa Docking System

Do not carry the Compact M40 by the monitor's
mounting frame or kickstand. Doing so can cause
the monitor to disengage from the docking system
and may result in property damage and/or serious
injury.

Mounting the Monitor

1. Turn the docking joints on sides of the kickstand so
that the openings point down.
Mounting Frame
Kickstand
Docking Joint
2. Center the CS6x Versa over the docking fins and
align the docking joints with the joint sockets.
Joint Sockets
Docking Fins
3. Firmly push the monitor down into the docking sys-
tem until you feel the monitor lock into place.
10 – English – Compact M40
WARNING
Mounting
Quick-Release Knob

Removing the Monitor

1. Place the Compact M40 so you can grasp both
quick-release knobs.
2. Pull both knobs out and away from the docking fins.
In the same motion as pulling the knobs out, turn
the knobs together in either direction to disengage
the locks.
Note: The locks are disengaged when the yellow in-
dicator labels are visible under the knobs.
3. Grip the docking handle and pull the digital reporting
monitor straight up.
Clips