Makita LS1040F Technical Information page 5

R
epair
(3) Mount the motor unit to arm aligning the arm's holes with blade cases holes for inserting rod 16. See Fig. 11.
Arm
(4) Insert rod 16 which works as an axis for swinging motor unit. See Fig. 12. And fasten rod 16 with hex socket
head bolt M6x10. See Fig. 12A.
Fig. 12A
(5) Fasten link plate to arm with hex socket button head bolt M6. See Fig. 13.
And then, pressing down the motor unit, take off 2 bars from the side holes of blade case. See Fig. 14.
<Note> Apply adhesive to hex socket button head bolt M6.
Flat washer 7
Arm
Link plate
Fig. 13
Link plate
Hex socket head
bolt M6x10
Arm
Rod 16
Link plate
Ring 7
Fig. 11
Fig. 12
Hex socket button
head bolt M6
Bars
P 5 / 8
Fig. 14