4. Set Up and Calibration Procedures - Setting Auxiliary Switches (actuators mfd. pre-1/1/03)
Left hand
Pointer scale
SW#1
SW#2
Clockwise and counterclockwise rotation is the direction of the output shaft when facing the end
of the shaft. As shown, clockwise rotation of the output shaft activates SW#1 (at 0% on left hand
pointer scale) and CCW rotation activates SW#2 (at 100% on left hand pointer scale). Terminal
numbers are next to circles (see Figure 13 page 26).
72
10260S HercuLine® Actuator Installation, Operation and Maintenance Manual
End of travel limit switch settings
0%
8 (SW1 COM)
14
5
Figure 21 End of Travel Limit Switch Settings
Figure 22 Auxiliary Switch Settings
100%
9 (SW2 COM)
NC
NC
7
15
Revision 5
7/07