Programs (contd)
2 = Timed Zones
A zone programmed as Timed would be used to protect the main entry/exit door of the entry route.
LCD Keypad:
NOTE:
Pressing the number toggles the zone ON or OFF
While in Engineer program mode, to set up zones as timed,
•
Press
to give a choice of programs or press
until P>Programs is displayed then press
•
Select program 1, 2 or 3.
•
The first screen to appear is Program Edit Used Zones.
•
Press [2] to enter into Timed Zones. The first zone can now be
set as timed or untimed.
•
To edit the other zones press [Number] or
particular zone.
•
Press
three times to leave menu.
LED Keypad:
NOTE:
Pressing the number toggles the zone ON or OFF
While in Engineer program mode, to set up zones as timed,
•
Press
to give a choice of programs. LED's 1, 2 and 3 are
flashing.
•
Select program [1, 2 or 3]. If program 1 is selected, LED 1 is ON.
•
Press [2] to enter into Timed Zones. The first zone can now be
set as timed or untimed.
•
To edit the other zones press [Number] to go to a particular zone.
Default settings are shown opposite.
•
Press
three times to leave menu.
Accenta/Optima Engineer's Manual
P>Select Program
.
1 2 or 3
P>Program Edit
1: Descriptor
Timed:
to go to
a
2: Descriptor
Timed:
P> Programs
36
[Number]
Used Zones
[2]
YES
[Number] or
NO
4
5
1
2
3
6
[1]
1
2
3
4
5
6
[2]
1
2
3
4
5
6
[Number]
4
1
2
3
5
6
1
2
3
4
5
6
7
8
7
8
8
7
8
7
7
8