Only use appropriate mounting parts (anchors and screws) that are suitable for the intended application. The maximum permitted working load of the Z5440 Wall mount bracket is 16 kg (35 lb), which corresponds to the weight of a complete 24C/24C-E assembly.
1.3. Intended use The d&b Z5440 Wall mount bracket must only be used in conjunction with applicable d&b column loudspeakers. It is intended for direct and parallel wall mounting with a maximum distance of 26 mm (1") between the column loudspeaker and the...
2. Turn the first screw through 90° to fix the T-slot nut in place. 3. Tighten the screw to a torque of 8 N×m. 4. To fix the remaining nuts, proceed in the same manner. d&b Z5440 Mounting instructions 1.2 en...
Page 7
2. Attach the U washers [4] and the self-securing nuts [5]. 3. Slightly tighten the nuts. 4. Set your desired horizontal aiming. 5. Finally tighten all nuts to fix the cabinet in its horizontal position. d&b Z5440 Mounting instructions 1.2 en...
3. Built-in dimensions Built-in dimensions in mm [inch] From left: Total height of single 16C and 24C column, total height of 24C with 24C-E extender, minimum and maximum depth. d&b Z5440 Mounting instructions 1.2 en...
4. Declarations 4.1. Manufacturer's declaration This declaration covers: ▪ d&b Z5440 , Wall mount bracket. National standards and technical specifications applied: DIN 18 800, DIN 1055, DGUV Vorschrift 17. Backnang, 2014-02-04 Frank Bothe, Head of R&D d&b audiotechnik GmbH 4.2. Disposal When out of use the rigging components must be disposed of in accordance with the national environmental regulations.