Electronic Function - Makita DUT130 Instruction Manual

Accidental restart preventive
function
If you install the battery cartridge while pulling the
switch trigger or locking the switch trigger, the tool does
not start. To start the tool, release the switch trigger, and
then pull the switch trigger.

Electronic function

The tool is equipped with the electronic functions for
easy operation.
• Soft start
The soft-start function minimizes start-up shock,
and makes the tool start smoothly.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Installing the front cover and side
grip
Tighten the side grip firmly.
CAUTION:
Otherwise, the front cover may fall and cause an
injury.
2
► 1 . Front cover 2. Side grip
Attach the front cover to the tool and screw the side grip
on the tool securely.
The side grip can be installed on either side of the tool.
1
Installing the shaft
Optional accessory
For DUT130
1. Tighten the shaft into the shaft holder.
1
► 1 . Shaft 2. Shaft holder
2. Tighten the shaft with wrench while holding the
shaft holder with another wrench.
2
1
► 1 . Shaft 2. Shaft holder
For DUT131
1. Insert the shaft into the chuck as far as it will go.
1
► 1 . Shaft 2. Chuck
8 ENGLISH
2
2