Honeywell Galaxy 18Galaxy Programming Manual page 47

Galaxy Programming Manual
45 - Timer Control (cont'd)
Galaxy 60, 128, 500 & 504
The holiday periods can be programmed by a valid user.
Galaxy 512
The holiday periods can only be programmed by the engineer. Users can access this option, however, they
can only view the programmed holiday dates.
2 = Assign Groups
This function determines which of the groups are affected by the programmed holiday periods.
On selecting the Assign Groups option, the groups currently assigned to the programmed holiday periods are
indicated by a Y below the group; an N is displayed below the unassigned groups. All groups default to Y.
Pressing the group number toggles the group status. When the required groups have been assigned to the
holidays, press the ent key to accept the programming and return to the previous menu level.
Galaxy 512
The Galaxy 500, 504 and 512 have more than 8 groups; these are displayed on the keypad in blocks of eight
groups. Press A or B keys to display each of the group blocks.
Press keys 1 – 8 to assign the relevant groups in each block to the user.
3 = Timers (Galaxy 18, 60, 128, 500 & 504)
This option allows Timer A and Timer B to be switched on and off as required. If a Timer is set to off, the
operation of the Timer is suspended; this option cannot be used to alter the programmed times. Both timers
default to 0 = Off. To switch the timers on, select the required timer and change the setting to 1 =On.
The Timer Status can also be altered through menu option 65.1 by the engineer only.
Galaxy 512
This option is not available on the Galaxy 512.
4 = Early Open (Galaxy 512)
If the Early Open option (45.4.2) is enabled, the Lockout OFF time (refer to option 65 = TIMERS) for
the following day is brought forward by the number of minutes (0 – 240) programmed in parameter 44 =
Early Open. This allows the system to be manually unset earlier than normal.
1 = Early Times
This function displays the time that the system can be manually unset on the following day; this time is the
Lockout OFF Time minus the Early Open period and is displayed in the 24 hour format.
If groups have been enabled, the early opening time for each of the groups enabled for early opening in the
Early Open option can be viewed by pressing the A or B keys
This function only displays the early time if the Early Open option is enabled; if this option is disabled or if no
groups have been enabled, the message NO ENTRIES is displayed.
41