Layout Control In A Call; Selecting A Different Layout; Adding A Pip Self-View; Moving The Pip Self-View - Cisco TelePresence EX60 User Manual

Cisco TelePresence System EX60 & EX90

Layout control in a call

You may alter the screen layout when you are in a call.
The Touch pad will show the options available. The
actual options may differ from what is shown here, but
the Touch pad will always show you what is available.
The WYSIWYG (what you see is what you get)
principle applies even here.
D1501606 User guide EX60 & EX90, English
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.2, 07.2013

Selecting a different layout

In a call tap Layout, as outlined,
then select the preferred layout, as
outlined.
To exit the layout without changing
anything, tap Layout again.

Adding a PiP self-view

Tap as outlined at all times during
a call to add self-view to your
screen (this will not be seen by
the remote participants).
The self-view will appear as a PiP
(Picture-in-Picture).

Moving the PiP self-view

Tap and hold the PiP, as outlined.
When the PiP turns blue you may drag
it to a new position, choose among six
predefined positions, as outlined.
20
User guide
www.cisco.com