Cisco TelePresence EX60 User Manual page 18
Software version tc6.2
Hide thumbs
Also See for TelePresence EX60:
- Administrator's manual (134 pages) ,
- User manual (75 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
Cisco TelePresence System EX60 & EX90
Receiving another incoming
call, while already in a call (II)
Assume that you are already in a call. If you then
receive another incoming call, you will have the
following options:
•
You may decline the call and continue with what
you were doing.
•
You may put the current call on hold and accept
the new call. At any time you may swap between
the two. Systems with no MultiSite or Multiway/
CUCM installed cannot create a conference and
they are therefore confined to this way of talking
to both (that is, one at a time). They do, however,
support one extra audio-only call.
•
You may transfer the incoming call to someone
else, including the one you were talking to—see the
following page for more on this.
•
You may, after putting the incoming call on hold,
merge this call with the existing (optional feature
requiring conferencing options present).
•
You may merge the incoming call directly with the
ongoing call (ACCEPT & MERGE), but this can
only take place if your video system is equipped
with the MultiSite option (EX90 only).
Note that in the case of Multiway/CUCM, a small time
delay may be experienced when accepting that an
incoming call joins the ongoing call. This is due to the
transfer of the call to the external MCU.
D1501606 User guide EX60 & EX90, English
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.2, 07.2013
The one(s) you already
are in a call with.
Accept the incoming
call and merge it with
the ongoing call*.
For Multiway/CUCM
you must put the
current call (or group
of calls) on hold
before merging can
take place.
This is due to the fact
that the incoming call
must be transferred
to the MCU and then
merged.
Accept the incoming
call, while holding the
current call or group of
calls.
*
If your system is equipped with MultiSite (EX90 only) you may merge the incoming with the current call.
For systems without MultiSite installed, the incoming call may still be merged, but as an audio-only call.
18
The identity of the new
incoming call.
Accept the incoming
Ignore the incoming call (you
call, while ending the
will appear as absent to the
current call or group of
one who is calling you).
calls.
User guide
Decline the incoming call
and carry on as you have
been doing.
www.cisco.com
Advertisement
Table of Contents
