Connection Diagram Of Lighting Modules - Honeywell HAS-QNH Reference Manual

Connection Diagram of Lighting Modules

Connection Diagram of Lighting Modules is shown below
LAMP / APPLIANCE LAMP / APPLIANCE
MODULE MODULE
AC OUTLETS AC OUTLETS
CONTROL INTERFACE
(WIRED / WIRELESS)
•
Lamp/Appliance Modules for the different areas in the residence can be directly
connected to AC Power with the Normal Wiring. Wireless lighting solutions are
also available. Refer to your Automation O/S software documentation for
additional information. Set the device address and code as per the technology
used.
•
Connect the control interface to the server using the appropriate cables and to
right ports (RS-232, USB, and Ethernet). Refer to the installation/user manuals
supplied with the control interface for details
•
Configure the Software Settings with the Device Name or Unit Code and House
Code Details. Refer to the manual supplied with the Automation O/S software
that you purchased for details.
•
User can set the lighting scene, grouping and modes in the software.
•
User interface with the Honeywell Home Automation server may be achieved by
computer, home telephone or microphone.
For detailed instructions on how to configure Schedules, Modes and Tasks please
refer to the manual supplied with the Automation O/S software that you purchased.
LAMP / APPLIANCE LAMP / APPLIANCE
MODULE
AC OUTLETS AC OUTLETS
USER INTERFACE
OPTIONS
COMPUTER PHONE MIC
HONEYWELL HOME AUTOMATION SERVER
– 10 –
LAMP / APPLIANCE
MODULE MODULE
AC OUTLETS
HAS-002-V0