System Design; Connection Alternatives - Honeywell LANSRLU1 Quick Start User Manual

Honeywell Access Systems

System Design

NCI Card

Connection Alternatives

Connection
N-485-HUB-2
N-485-PCI-2
N485PCI2L
7-101002-00
Null Modem Gender Changer 25-pin M-M
UDS100 Device
Description
• 25-pin male on serial end.
• HUB firmware is used for
dial-up systems.
• 9-pin female on serial end.
• Designed for direct con-
nect.
• 25-pin female on serial end.
• Designed for connection to
the LANSRL or LANSRLT.
HUB
ETHERNET
CABLE
Replace the HUB firmware chip with
a PCI firmware chip. Be sure that the
version PCI matches that of the HUB.
Use a 9-pin to 25-pin M-M Null
modem adapter to interface between
the PCI and the UDS100.
Use a 25-pin M-M Null modem
adapter between the PCI and the
UDS100.
LANSRLU1
N485PCI2L
RS-232
PANELS
Remedy
11