Radio Configuration; Radio Configuration Menu - GE MDS Mercury Series Reference Manual

Invisible place holder
Figure 3-25. SNTP Server Entry (on Network Configuration Menu)
When is selected (item H), the area to the right of the param-
SNTP Server
eter becomes active, allowing you to enter a valid SNTP server address.
Press the Return key to make the address entry active.

3.5 RADIO CONFIGURATION

There are two primary layers in the transceiver network—radio and
data. Since the data layer is dependent on the radio layer working prop-
erly, configure and set the radio items before proceeding. This section
explains the Radio Configuration Menu, (Figure 3-26 for AP,
Figure 3-27 for Remote).

3.5.1 Radio Configuration Menu

Figure 3-26. Radio Configuration Menu
(From Access Point)
58 Mercury Reference Manual 05-4446A01, Rev. C