05-4446A01, Rev. C
3.12 MAINTENANCE/TOOLS MENU
In the course of operating your network, you may wish to upgrade trans-
ceiver firmware to take advantage of product improvements, work with
configuration scripts, conduct "ping" tests of your system, or reset oper-
ating parameters to factory default settings. All of these tasks are per-
formed using the Maintenance/Tools Menu
explains how to take advantage of these services.
Figure 3-86. Maintenance/Tools Menu
•
Reprogramming
system firmware resources.
Page
114)
•
Configuration Scripts
ing unit operating parameters/settings.
Scripts Menu" on Page
•
—Diagnostic tool to test network connectivity.
Ping Utility
(See "Ping Utility Menu" on Page
•
Authorization Codes
enabling the built-in resources. (
Page
123)
•
Reset to Factory Defaults
settings.
(See "Reset to Factory Defaults" on Page
•
—A diagnostic tool for testing RF operation.
Radio Test
(See "Radio Test Menu" on Page
•
Firmware Versions
the radio and indicates which one is the active image. (See
Figure 3-87 on Page
•
Auto Firmware Upgrade
perform tasks related to loading new firmware.
Firmware Upgrade Menu (AP Only)" on Page
•
—A submenu for opening Telnet connections to net-
Telnet Utility
work devices
Mercury Reference Manual
(Figure
Invisible place holder
—Managing and selecting the unit's operating
(See "Reprogramming Menu" on
—Saving and importing data files contain-
119)
122)
—Alter the unit's overall capabilities by
See "Authorization Codes" on
—Restores parameters to factory default
125)
—Shows the firmware code versions stored in
114.)
—Brings up a submenu where you can
(Figure 3-88 on Page
3-86). This section
(See "Configuration
123)
(See "Auto
124.)
114).
113