How To Open The Top Cover - Cisco Aironet 521 Quick Start Manual

a521qsg.fmb Page 2 Monday, March 12, 2007 10:40 AM
D R A F T - C I S C O C O N F I D E N T I A L
a DHCP server. If your network does not use a DHCP server, you must
connect to the access point's console port and assign a static IP address (See
the "Assigning an IP Address Using the CLI" section on page 17.

How to Open the Top Cover

The top cover provides access to the cable and power connections.
Do not open the access point top cover as you would a hatch or
Caution
door. You could damage the cover by doing so. An instruction
label is attached to the access point. Take time to read the label
before you open the access point cover.
When you have familiarized yourself with the opening procedure, we
recommend that you remove the label, putting it in a safe place, such as inside
the cover of this guide.
Status LED indications are not visible when the top cover is open.
Note
Follow these steps to open the top cover:
1. Put the access point on a flat surface, and grasp it with both hands, as
shown in this illustration.
2
78-18092-01