Checking The Access Point Leds - Cisco Aironet 521 Quick Start Manual

a521qsg.fmb Page 16 Monday, March 12, 2007 10:40 AM
D R A F T - C I S C O C O N F I D E N T I A L

Checking the Access Point LEDs

If your access point is not working properly, check the Status LED on the top
panel or the Ethernet and Radio LEDs in the cable bay area. You can use the
LED colors to assess the unit status.
To see the Ethernet and Radio LEDs you must open the access
Note
point cover. (Refer to the "How to Open the Top Cover" section
on page 2.)
The LED meanings are in this table.
Top of Unit Cable Bay Area
Status LED Ethernet LED
16
Meaning
Radio LED
78-18092-01