Ssm-Tnc - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).

SSM-TNC

Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Transit Node Clock (TNC) Traceable condition occurs when the synchronization message quality
level is TNC for ADM-10G and MXP trunk ports.
Note
SSM-TNC is an informational condition and does not require troubleshooting.
SW-MISMATCH
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Software Mismatch condition occurs during software upgrade when there is a mismatch between software
versions.
Clear the SW-MISMATCH Condition
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Reset a Card in CTC, on page 449
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
SWTOPRI
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: EXT-SREF, NE-SREF
Reset a Card in CTC, on page 449
procedure for the errored card.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
http://www.cisco.com/c/en/us/support/index.html
procedure for the errored card.
http://www.cisco.com/c/en/us/support/index.html
SSM-TNC
407