Table of Contents
Advertisement
SECTION 5: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-36-
manual
BEFORE
General Operation
This cyclone dust collector creates a vortex of
incoming air that extracts heavy wood chips and
large or fine dust particles, and then drops them
into the steel drums below, which are lined with a
plastic bag (see Figure 71).
Filter
Brush
Motor
(1 of 2)
Canister
Filters
Fine
Dust
Wood
Chips
Figure 71. Dust collector operation.
The remaining dust travels past the impeller and
is then caught by two canister filters and depos-
ited in the plastic collection bags below. These
spun-bond polyester filters catch 99.9% particles
from 0.2 to 2 micron in size and larger, and are
pleated to provide maximum surface area for effi-
cient airflow.
To maintain CFM during heavy dust-collection
operations, two filter brush motors rotate internal
brushes that knock caked-on dust into the plastic
collection bags.
Always lock swivel casters during operation.
Model G0850 (Mfd. Since 01/19)
Incoming Wood
Chips and Fine Dust
Advertisement
Table of Contents
