Table of Contents
Advertisement
SECTION 7: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged filter canister, cleaning brush com-
ponents, or collection bags.
•
Worn or damaged wires.
•
Suction leaks.
•
Any other unsafe condition.
Monthly Check
•
Clean/vacuum dust buildup off machine body
and motor.
To avoid damage to your
eyes and lungs, always
wear safety goggles and
a respirator when working
with the dust collection
bags or canisters.
Model G0850 (Mfd. Since 01/19)
Removing/Replacing
Collection Bag
Remove and replace the collection bag when it
is about
⁄
full. If the bag gets overfilled, the dust
3
4
will be sucked into the intake barrel and passed
through to the canister filter and filter bag. Avoid
allowing this to happen, as it may reduce filter life.
IMPORTANT: To contain wood dust and minimize
exposure risk, firmly tie bag closed.
How quickly the collection bag will fill up and
require replacement is based on the type of work
being done at the time:
•
Fine dust from a sander or table saw will
slowly fill the bag.
•
Curly shavings from a planer or jointer will
quickly fill the bag.
Items Needed
Collection Bag T30327 ...................................... 2
To remove and replace collection bags:
1.
DISCONNECT MACHINE FROM POWER!
2.
Lift collection drum handles, then pull drums
away from machine (see Figure 78).
Collection Drum Handles
Collection
Drums
Figure 78. Collection bag components.
Qty
-39-
Advertisement
Table of Contents
