Buffalo WCR-HP-GN User Manual page 44

Chapter 4 Configuration
Parameter
Wireless Radio
Wireless Channel
150Mbps Mode
Broadcast SSID
SSID1
SSID2
SSID3
SSID4
Separation
SSID
Authentication
WCR-HP-GN User Manual
Meaning
Enable to allow wireless communication. If this is unchecked, then
no wireless connections will be allowed.
Sets a channel (a range of frequencies) used for wireless
connections. Available range of channels is 1-11.
With Auto Channel selected, the AirStation will automatically use
the best available channel.
This parameter is disabled if WDS is in use.
150 Mbps mode uses twice the normal frequency range, 40
MHz instead of 20 MHz. In uncongested areas this can increase
performance. To use 150 Mbps mode, set the Bandwidth to 40 MHz
and choose an Extension Channel.
Note: If using Auto Channel for the wireless channel, then the Extension
Channel is set automatically.
This parameter is disabled if WDS is in use.
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignore SSID searches from wireless
devices.
Always enabled and supports all wireless encryption types.
Encryption can be disabled.
Always enabled and supports all wireless encryption types.
Encryption can be disabled.
SSID3 can use WPA-PSK-AES encryption.
SSID4 can use WEP encryption.
When enabled, wireless devices connected to the AirStation can
communicate only with the Internet, not with each other.
This parameter does not function if WDS is enabled.
Set SSID using 1-32 alphanumeric character(s).
Specify the type of wireless authentication.
43