Buffalo WCR-HP-GN User Manual page 15

Chapter 3 Installation
4
Connect your computer to one of the AirStation's LAN ports with the Ethernet cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
AirStation wireless router
(rear side)
power outlet
5
Confirm the devices are connected correctly as the below diagram shows.
computer
ON
power outlet
6
Wait for a minute or so, until the AirStation's LEDs are lit as described below:
Power
Wireless
Router
Diag
LAN
Internet
※ Refer to page 7 for LED locations and other details.
7
Launch a web browser. If the [home] setup screen is displayed, setup is complete.
If a user name and password screen are displayed, enter [root] (in lower case) for the user
name, leave the password blank, and click [OK]. Follow the instructions on the screen to
complete setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WCR-HP-GN User Manual
1) connect
PC
1) connect
Ethernet cable
2) connect the power supply
modem
Green light is on
Green light is on
Green light is on
Off
Green light is on or blinking
Green light is on or blinking
ADS S
LAN
1
2
3
4
IN TE
RN ET
PO W
ER
14