Cisco IE-4000 Software Configuration Manual page 137

Configuring CIP
Restrictions for Configuring
CIP can be enabled on only one VLAN on the switch.
Information About Configuring
The Common Industrial Protocol (CIP) is an industrial protocol for industrial automation applications. It is supported by
Open DeviceNet Vendors Association (ODVA), an organization that supports network technologies based upon CIP such
as DeviceNet, EtherNet/IP, CIP Safety and CIP Sync.
Previously known as Control and Information Protocol, CIP encompasses a comprehensive suite of messages and
services for the collection of manufacturing automation applications - control, safety, synchronization, motion,
configuration and information. CIP allows users to integrate these manufacturing applications with enterprise-level
Ethernet networks and the Internet.
How to Configure CIP
Default Configuration
By default, CIP is not enabled.
Enabling CIP
Command
1. configure terminal
2. cip security {password
password | window timeout
value}
3. interface vlan 20
4. cip enable
5. end
6. show running-config
7. copy running-config
startup-config
CIP
CIP
Purpose
Enters global configuration mode.
Sets CIP security options on the switch.
Enters interface configuration mode.
Enables CIP on a VLAN.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Cisco Systems, Inc. www.cisco.com
133