Overview; Location Code; Pickup Position Code; Pickup Size - Canon imageRUNNER ADVANCE 715 series Service Manual

Overview

This section describes the error codes that are displayed when failure has occurred. The codes are divided into three categories.
Code types
Error Codes This code is displayed when a failure caused by the host machine
has occurred.
Jam code This code is displayed when a jam occurs inside the machine.
Alarm code This code is displayed when some functions are disabled.
Display of error codes
The 7-digit "E000XXX"error code is displayed on the display of the Control Panel. However, since "000" of the 2nd to 4th digits
is not used, the 5th to 7th digits are described as "EXXX" in the Service Manual. (Example: E012 -> E000012)

Location Code

The error codes, jam codes, and alarm codes of this machine contain information on the location.
The location is displayed in 2 digits and has the meaning shown below: (In the jam display screen, the "L" row corresponds to
the location code.)
Host machine
Reader/ADF
Cassette Module-AG1
Envelope Cassette Module-A1
Cassette Feeding Unit-AR1
High Capacity Cassette Feeding Unit-D1
Inner Finisher
FAX Board

Pickup Position Code

When jam occurs, pickup location is indicated with the following pickup position code. (In the jam display screen, the "P" row
corresponds to the pickup position code.)
At Finisher jam/At error avoidance jam/At ADF jam without pickup operation (at SEND, BOX, etc.)
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Multi-purpose Tray Pickup Assembly
Duplex (At duplex printing, jam occurs after paper passes through the Duplex Feed Sensor.)

Pickup size

When a jam occurs, a paper size is displayed. (The row displaying "SIZE" on the jam screen refers to the paper size.)
Due to the limitation of displayable number of characters, some paper size names are omitted. The following is the list of displayed
row of texts and corresponding paper sizes.
* The following is based on the display specification and not all paper sizes can actually be used.
Display
A0
A1
Description
Device
Pickup position
Paper Size
A0
A1
"Error Code" on page 271
"Jam Code" on page 336
"Alarm Code" on page 327
JAM
00 Main Controller: 00
Printer engine: 05
01 04
00 05
00 05
00 05
00 05
02 02
- 07
Display
LDR
LDRFB
268
7. Error/Jam/Alarm
Reference
ERR ALARM
Other than
those below
02, 50
04
04
04
04
61
-
Pickup position code
00
01
02
03
04
05
F0
Paper Size
LEDGER
LEDGERFULLBLEED