Table of Contents
Advertisement
9.
CAUTION:
• Do not hit the gear on bottom of the Main Drive Unit to the host machine.
• Check that the spring is installed at the position as shown in the figure.
Removing the Paper Pickup Unit
■ Preparation
1.
" Removing the Rear Cover" on page 109
2. Remove the Drum Unit.
3. Pull out the Cassette1.
4.
" Removing the Fixing Assembly" on page 212
5.
" Removing the Left Rear Cover" on page 109
6.
" Removing the Main Controller PCB" on page 193
7.
"Removing the Inlet Cover" on page 111
8.
" Removing the Low-Voltage Power Supply PCB" on page 195
9.
" Removing the Fixing Drive Unit" on page 212
10.
"Removing the Inlet Unit" on page 196
11.
"Removing the Drum Motor Unit" on page 210
12.
"Removing the Main Drive Unit" on page 215
219
4. Parts Replacement and Cleaning
Advertisement
Table of Contents
