Table of Contents
Advertisement
Canon
I.
Introduction
This section contains the product overview, features, configurations, speed upgrade
options, optimum performance range and maximum monthly print/copy volume.
A.
Product Overview
The varioPRINT 6000 TITAN Series are digital duplex cut-sheet printers
powered by the Gemini Instant Duplex technology that simultaneously presses
images to both sides of the paper in a single pass, delivering accurate
registration and offset-class quality. The varioPRINT 6000 TITAN Series is the
successor to the varioPRINT 6000+ Series.
The varioPRINT 6000 TITAN Series is available in three versions. The
"standard" varioPRINT 6000 TITAN Series is suitable for large Corporate Print
Rooms, Commercial Print environments and on-demand book printers.
The varioPRINT 6000 TP TITAN Series is suitable for transaction environments
and direct mail environments where high productive near line and offline
finishing equipment are is used.
The varioPRINT 6000 MICR TITAN Series combines the attributes needed to
print magnetically readable characters, for sensitive documents like checks and
negotiable documents as well as a standard document printing solution.
These models bring the following capabilities to end-users:
Note: For a detailed list of specifications and differences between the models
please refer to the specifications Section on the appendix.
•
Prints two-sided LTR (Letter-size) documents at the print speeds below:
•
varioPRINT 6330 (Standard / TP): up to 320 ipm (images per minute)
•
varioPRINT 6270 TITAN (Standard / TP / MICR): up to 266 ipm
•
varioPRINT 6220 TITAN (Standard / TP / MICR): up to 216 ipm
•
varioPRINT 6180 TITAN (Standard / TP / MICR): up to 177 ipm
•
Supports multiple paper input devices up to three (3) a combination of the
Paper Input Module (PIM), PIM Flex-XL and roll feeder.
•
The optional Light Weight Media Kit enables support of validated media
with a paper weight as low as 12 lb bond/30 lb text (45 g/m
•
Supports up to three stackers. A set finisher with additional stacking and
stapling capabilities can be attached to one of the Stackers.
•
In-line finishing devices are available for hole punch, binding and booklet
making and trimming.
varioPRINT 6000 TITAN Series Service Guide
Revision 1
varioPRINT 6000 TITAN Series Service Guide
2
).
April 2021
Page 1
Advertisement
Table of Contents
